Sewing Machine

Janome 3160 QDC

Make: Janome

Model: 3160QDC

Serial Number: 8H2036666 / 8H2036653

Ace: Brooke Frisk (bfrisk24@georgefox.edu).

Location: The Hub

Description

There are currently four Janome 3160 QDC sewing machines available for use in the Maker Hub. These machines feature 60 different stitch patterns. It has automatic fabric feeding, one hand needle threader and easy to follow instructions, making it an ideal machine for first time sewers. Some of its more advanced features include buttons for lock stitch, needle up or down and automatic thread cutting. It has a add on platform that can be attached to make sewing larger materials a breeze.

Here is an example of this piece of equipment being used.

Documentation

• Product Home Page
• User Manual

Terminology

• Spool - Holder used for thread.

Training

All information on these specific machines can be found in the User Manual and on the Product Home Page

How to set up the machine. This video shows a similar set up process to our machines, but be sure to compare to the manual.

A quick video on basic stitching techniques:

YouTube is a great resource for learning new things. If you are new to sewing, try watching a few videos to get a general understanding before jumping into sewing.

Operation

wind the bobbin

- once you picked the type/color of thread spool, first get some of it loose and out and secondly place it on the skinny tub. Then, add the spool cap. the side will depend on the type/ style of thread spool you picked.

- as you follow the guide images, put the thread around the metal know. Then slide the thread through one of the holes in the bobbin and place it in the small metal tube that its on the right top f the machine. Slide the bobbin winder shaft over to lock it.

- hold the thread for couple seconds at the begging as you press the presser foot gently and slow. Once it took off evenly or uniform, you can let go of the thread and go faster. with the presser foot

- cut the thread once you are done and place the bobbin unto the machine. the top drop in bobbin is covered by a plastic cover that you can remove by gently pulling the black small square to the right. Drop the bobbin and wrap the thread around a clip is also under the plastic cover. finally, put the cover on.

thread the machine

- grab onto the thread from the thread spool and run the thread through the knob and going down then up, following the image guide around and make sure it is catching all parts. At the end thread the needle

Demonstration

Demonstrate you can safely setup the sewing machine and sew a mini pillow. You will also need to demonstrate how to wind the bobbin and thread the machine.

General Procedure

Cross Cut

1. Move the fence off to the side by lifting the brake handle and sliding the fence off to the side.

Safety

There are several hazards you need to be aware of when using a sewing machine.

• Keep your fingers away from moving parts.
• Never place your finger under the needle.

Certification

Foxtale Course

Troubleshooting

There are many different types of problems you can have while using a sewing machine, but here are a few basic problems.

1. The needle thread breaks: Check the threading of the needle as it may not be threaded properly.

2. The needle breaks: Make sure the needle is installed correctly and is tight. Verify you are using the correct pressure foot.

3. Machine does not run smoothly: Verify the hook race and bobbin holder are free from lint.

Maintenance

General maintenance

Keep the sewing machine clean and free from lint. Make sure to reset the space when you are done sewing.

Specific Maintenance Tasks

Maintenance Procedure	Frequency	Done By
Lubricate mechanisms	Semester	Sample
Clean machine interior	Monthly	Tech
Change the blade	As Needed	Tech