Difference between revisions of "Tools"

From maker-hub
Jump to navigation Jump to search
Line 43: Line 43:
 
  | Bubble Level
 
  | Bubble Level
 
  |A bubble level has many uses including, but not limited to verify plumb and level.  Some of the many uses include picture and sign hanging, post installation, machine leveling.  
 
  |A bubble level has many uses including, but not limited to verify plumb and level.  Some of the many uses include picture and sign hanging, post installation, machine leveling.  
  |[[File:image_pending.png|center|100px]]
+
  |[[File:image_pending
 +
[[File:Bubble level.jpg|100px|center]]
 
}}
 
}}
 
{{ToolInfo
 
{{ToolInfo

Revision as of 15:43, 28 May 2020

Tool NameDescriptionImage
A.C. ClampmeterThis instrument can be clamped over a wire to measure the current flowing through it.
Clampmeter.jpg
AC/DC Current ClampA current clamp is a device that measures electric current flowing through a wire, cable, busbar, or other conductor.
AcDC current clamp6.jpg
Analog Discovery 2A USB oscilloscope, logic analyzer, and multi-function instrument that allows users to measure, visualize, generate, record, and control mixed-signal circuits of all kinds.
Analog Discovery 2.jpg
Arduino UnoArduino Uno is an open-source microcontroller board based on the Microchip ATmega328P microcontroller. It is a Single circuit board that can be programmed and comprises of 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header and a reset button.
Arduino Board.jpg
BTMN BoardARM training board used in ENGE320. Coupled with the Arduino Zero. Shield includes an AMOLED display, joystick, DPAD, RGB LED's, accelerometer, SD Card slot, and a piezo buzzer.
Robin Boards large.jpg
Basys 3 FPGA BoardFPGA training board used in ENGE220. Has a bank of switches, buttons, LCD display, 7-Segment display, piezo buzzer, stepper motor driver, and more!
Boards long.jpg
Battery ChargerThis is a battery charger for lead acid batteries.
Battery charger.jpg
Battery Terminal CleanerA wire brush designed to remove corrosion and contaminants from the terminals of a car battery.
Battery Terminal Cleaner.jpg
Bolt CuttersPowerful cutting tool to cut through thick metal pieces.
BoltCutters.jpg
Bottle JackThis is a hydraulic jack and can be used for lifting heavy objects. Never put anything under heavy objects that you wouldn't want crushed.
Bottle jack.jpg
Bubble LevelA bubble level has many uses including, but not limited to verify plumb and level. Some of the many uses include picture and sign hanging, post installation, machine leveling.
Bubble levelBubble level2.jpg
Caulking GunA tool which holds tubes of caulk and is used to seal up cracks and gaps in various structures.
Caulk.jpg
ClippersAlso known as diagonal cutters.
Clippers.jpg
Cordless 1/2" Impact Driver and socketsThe impact Driver is specially designed for tightening and loosening various hex-head bolts, nuts, and lag screws. It employs both rotational force (torque) and short-burst concussive blows (impacts) to deliver an unparalleled amount of power.
Impact.wrench and sockets.jpg
Cordless 3/8" Impact and Bit SetThe impact Driver is specially designed for tightening and loosening various hex-head bolts, nuts, and lag screws. It employs both rotational force (torque) and short-burst concussive blows (impacts) to deliver an unparalleled amount of power.
Eeeeee.jpg
Cordless DrillYou can use a cordless drill driver to drill or bore holes, drive screws, assemble furniture, and woodworking.
Drill.png
Cordless Reciprocating Saw 20Va handheld power saw that features a blade designed to be easily swapped out for different tasks and moves back and forth to quickly cut through a variety of materials.
Dewalt 20v.jpg
CrimpersFor crimping things.
Crimpper.jpg
Digilent Nexys 2A powerful digital system design platform built around a Xilinx Spartan-3E FPGA.
Digilent Nexys 2.jpg
Digital CalipersInstrument used to gain a precise measurement of a material or structure.
Calipers.jpg
Digital Logic ProbesProbes that can be used with...
Digital Logic Probes.jpg
Digital TachometerThis is an instrument that is used to measure revolutions per minute or RPM. This is a non contact device that uses light and a reflector. This device can be used to measure the RPM of a motor shaft.
Digital Tachometer.jpg
DremelHand powered tool with different tips, that is mostly used for craft purposes, such as carving, etching and sanding small items.
Dremel.jpg
Electronic ScaleDevice to measure weight or mass.
R0101.jpg
Eye LoupesSmall magnifying glasses.
Eye.jpg
Fluke Thermal ImagerA thermal Camera. Very Expensive.
ThermalImagerLowrez.png
FluxFor soldering.
Fluxxx.png
Flux BrushFor soldering.
FLUXX BRUSDHH.png
Flux PenFor soldering.
FLUX PEN.png
Fume ExtractorA device which uses a fan to collect and filter harmful fumes. Always use one of these when soldering for your protection.
FUMEextractorFE.jpg
GoPro CameraFor Going Pro. Takes Video and Pictures. Can be used with the GoPro Accessories in the GoPro accessory kit.
GoProlowres.png
Handheld MultimeterAn instrument for conducting measurements on a circuit. They can measure DC voltage, AC RMS Voltage, current, resistance, and more. Multimeters are essential tools for testing or troubleshooting a circuit.
Multall of them01.jpg
Heat GunA power tool that emits a stream of hot air, usually at temperatures between 100 °C and 550 °C (200-1000 °F), with some hotter models running around 760 °C (1400 °F), which can be held by hand
Heat gun.jpg
Heat Sink ClipHeat sink clip for soldering.
Heat sink clop tool.png
Helium Balloon InflatorThis is connected to a helium bottle and allows the user to fill a helium balloon.
Ballom inflator.jpg
Helping HandsAn extra set of hands to hold things while soldering.
Helping hands.jpg
Holesaw KitA holesaw is used in a drill to cut perfectly round holes in a wide variety of materials
Hole saw kit.jpg
Impact Driver KitAn impact driver is a tool that is used to drive screws and bolts. It is designed to deliver high torque output with minimal exertion by the user. Impact drivers are ideal for driving large screws and bolts more efficiently than the average compact drill. This set includes various bits that will fit into an impact driver.
Impact driver.jpg
LED WorklightA really bright light for illuminating an area.
Led working light.jpg
Laser ThermometersHandheld device that can display temperature readout on it after scanning portions of an object or area with the built-in laser. They tend to be inaccurate when measuring shiny objects, putting some non-reflective tape on the object can help give a better measurement.
LASER THERMOMETERS.jpg
Logic AnalyzerUsed to monitor and debug various digital signals and communication busses.
Logic Analyzer.jpg
MirrorAn extendable mirror for viewing hard-to-see places.
Mirror.jpg
MultimeterA multimeter is a measuring instrument that can measure multiple electrical properties. A typical multimeter can measure voltage, resistance, and current, in which case can be used as a voltmeter, ammeter, and ohmmeter. Some feature the measurement of additional properties such as temperature and capacitance.
Multi5.jpg
Needle Nose PliersSkinny pliers.
Nene.jpg
PCB TweezersTweezers for PCBs.
PCB Tweezers.jpg
Phone Gimbel SetA tool used to stabilize a phone so that it can be rotated around an axis
Phone gimbel.jpg
Pipe CuttersA tool used to cut pipe.
Pipe cutter.jpg
Portable ViseA vice grip for holding things.
Vicegrip.jpg
Pressure GaugesFor measuring pressure.
Pre gage.jpg
Pressure RegulatorThis is for reducing the air pressure of a compressed air bottle.
Press Regul.jpg
... further results



{{ToolInfo

| Bubble Level
|A bubble level has many uses including, but not limited to verify plumb and level.  Some of the many uses include picture and sign hanging, post installation, machine leveling. 
|[[File:image_pending
Bubble level.jpg

}}