Difference between revisions of "Blast Cabinet"
Jump to navigation
Jump to search
| Line 55: | Line 55: | ||
# Tape existing stencil to a piece of acrylic scrap. The stencil will only allow abrasion in the areas desired. | # Tape existing stencil to a piece of acrylic scrap. The stencil will only allow abrasion in the areas desired. | ||
| − | # Open the cabinet door. | + | # Open the cabinet door using the door latch. |
# Place stencil/acrylic into sandblast cabinet | # Place stencil/acrylic into sandblast cabinet | ||
| − | # After placing parts in the cabinet, make sure to secure the door. If the door is left open it will create a cloud of dust that should not be inhaled. | + | # After placing parts in the cabinet, make sure to secure the door using the latch. If the door is left open it will create a cloud of dust that should not be inhaled. |
| − | # Turn on the cabinet light and fan switch. The switch is located on the top left of the machine. | + | # Turn on the cabinet light and fan switch using the power switch. The switch is located on the top left of the machine. |
# Insert your arms into the gloves and position yourself for a clear view into the cabinet. | # Insert your arms into the gloves and position yourself for a clear view into the cabinet. | ||
# Picking up the parts and gun, manually aim where the stencil doesn't cover the acrylic. Do not point the gun at your gloves or the window. | # Picking up the parts and gun, manually aim where the stencil doesn't cover the acrylic. Do not point the gun at your gloves or the window. | ||
Revision as of 16:20, 27 May 2020
Make: Skat Blast
Model: SC-40
Ace: Needed (Makerhub@georgefox.edu).
Location: Welding Shop
Description
The 960-DLX DELUXE Skat Blast Cabinet has become one of "America's Favorites". TWO 90 watt floodlights and big 12" x 33" window for improved, brighter visibility when blasting. Plus, Skat Blast's C-35-M Foot-Pedal-Operated Power Gun and pickup tube system for a more powerful, even blast. Quiet Vac-50 HEPA Vacuum with HEPA Filtration collects 99.97% dust particles down to 0.3 microns.
Here is an example of this piece of equipment being used.
Documentation
Terminology
Insert terminology here
Training
Overview
Insert Text
Demonstration
Blast stencil pattern on acrylic
General Procedure
- Tape existing stencil to a piece of acrylic scrap. The stencil will only allow abrasion in the areas desired.
- Open the cabinet door using the door latch.
- Place stencil/acrylic into sandblast cabinet
- After placing parts in the cabinet, make sure to secure the door using the latch. If the door is left open it will create a cloud of dust that should not be inhaled.
- Turn on the cabinet light and fan switch using the power switch. The switch is located on the top left of the machine.
- Insert your arms into the gloves and position yourself for a clear view into the cabinet.
- Picking up the parts and gun, manually aim where the stencil doesn't cover the acrylic. Do not point the gun at your gloves or the window.
- Position your foot in the foot pedal mechanism. Once pedal is depressed sand will blast out of the gun.
- When finished, turn the machine off.
- Before removing parts, wait 5-10 mins for the dust in the cabinet to settle.
- Once you remove parts make sure to close cabinet door and power off the light and fan.
Safety
- Make sure the cabinet door is closed before stepping on the air activation pedal.
- Keep the activation pedal clear when loading the cabinet.
- After you are done using the blaster let the dust in the cabinet settle prior to opening the door.
- Inhaling the dust produced by the cabinet is bad for your lungs.
- Never point the nozzle towards your hand or the window in the cabinet.
Certification
Troubleshooting
Maintenance
General maintenance
Insert text
Specific Maintenance Tasks
| Maintenance Procedure | Frequency | Done By |
|---|---|---|
| Nozzle Change | As Needed | Ace/Tech |