Difference between revisions of "Blast Cabinet"
Jump to navigation
Jump to search
Line 89: | Line 89: | ||
!Done By | !Done By | ||
|- | |- | ||
− | | | + | |Nozzle Change |
− | | | + | |As Needed |
− | | | + | |Ace/Tech |
|} | |} |
Revision as of 16:43, 15 August 2019
Make: Skat Blast
Model: SC-40
Ace: Levi Gibson (lgibson19@georgefox.edu).
Location: Welding Shop
Description
The 960-DLX DELUXE Skat Blast Cabinet has become one of "America's Favorites". TWO 90 watt floodlights and big 12" x 33" window for improved, brighter visibility when blasting. Plus, Skat Blast's C-35-M Foot-Pedal-Operated Power Gun and pickup tube system for a more powerful, even blast. Quiet Vac-50 HEPA Vacuum with HEPA Filtration collects 99.97% dust particles down to 0.3 microns.
Here is an example of this piece of equipment being used.
Documentation
Terminology
Insert terminology here
Training
Overview
Insert Text
Demonstration
Blast stencil pattern on acrylic
General Procedure
- Tape existing stencil to acrylic scrap
- Open the cabinet door.
- Place stencil/acrylic into sandblast cabinet
- After placing parts in the cabinet, make sure secure the door with latch properly
- Turn on the cabinet light and fan. Switch is located on the top left of the machine
- Locate the power switch and turn on the sandblaster
- Insert your arms into the gloves and position yourself to have a clear view into the cabinet
- Picking up the parts and gun, manually aim where the stencil doesn't cover the acrylic
- Position your foot in the foot pedal mechanism. Once pedal is depressed sand will blast out of the gun
- When finished, turn the machine off
- Before removing parts, wait 5-10 mins for the dust in the cabinet to settle
- Once you remove parts make sure to close cabinet door and power off the light and fan
Safety
- Make sure the cabinet door is closed before stepping on the air activation pedal.
- Keep the activation pedal clear when loading the cabinet.
- After you are done using the blaster let the dust in the cabinet settle prior to opening the door.
- Inhaling the dust produced by the cabinet is bad for your lungs.
- Never point the nozzle towards your hand or the window in the cabinet.
Certification
Troubleshooting
Maintenance
General maintenance
Insert text
Specific Maintenance Tasks
Maintenance Procedure | Frequency | Done By |
---|---|---|
Nozzle Change | As Needed | Ace/Tech |