Vinyl Printer+Cutter

The Roland BN-20 Vinyl Printer

Make: Roland

Model: BN-20

Ace: Summer Martindale (Makerhub@georgefox.edu).

Location: The Hub

Description

Insert Description Text

Here is an example of this piece of equipment being used.

Insert video media here.

Documentation

Terminology

Insert terminology here

User Manual

Training

Overview

Insert Text

Demonstration

Insert text

General Procedure

Insert text

Safety

Insert text

Certification

Foxtale Quiz

Maintenance

General maintenance

Insert text

Specific Maintenance Tasks

Maintenance Procedure	Frequency	Done By
Sample	Sample	Sample

Vinyl Printing is the process of applying ink to vinyl sheets to produce graphics. The maker hub has a Roland BN-20 printer/cutter. It uses a conventional inkjet printing method with solvent based inks.
⚠ WARNING: DO NOT unplug or turn off the printer using the rear cutoff switch for more than a couple hours. This will cause detrimental damage to the print head. However, using the front power button is safe.

Documentation

The Master Guide covers every basic thing about the BN-20. It has instruction on printing, cutting, maintenance, and calibration. Look over this if you are new to the BN-20.

• Master Guide

Training

The following is a description of the steps for printing from the BN-20

Design

The first step is to get your graphics ready for printing. Whether you get your graphics from the internet or deign them in a program similar to Adobe Illustrator, it will need to be imported into Adobe Illustrator for the process described here. These steps could be taken in CorelDRAW as well (refer to Master Guide), but this section does not cover that.s

Maintenance

The BN-20 needs to be maintained regularly. If not mainteined regularly, the machine becomes more prone to malfunction in the future.

Utility Software

The BN-20 has utility software in the system tray. It displays ink levels and helps the user do maintenance tasks.

Ink

Printing Cartridges

The utility software should notify the user when the ink is empty. When it is, remove the empty cartridge, get one of the same color and type (type must be Eco-Sol Max ink), shake the cartridge vigorously, and simply push it into the slot.

WARNING: Use only "Eco-Sol Max" ink. Do not use Eco-Sol Max 2 or 3.

Waste Cartridge

The utility software will notify the user when the waste ink cartridge is full. When this happens, remove the old waste cartridge and push in a new one The cartridge is located on the rear right of the machine).

WARNING: Replace the waste ink cartridge when and only when the utility notifies the user it is full.