Difference between revisions of "Hand Bender"
| Line 41: | Line 41: | ||
1) Cut a piece of .5"x.125" aluminum to a length of 6". | 1) Cut a piece of .5"x.125" aluminum to a length of 6". | ||
| − | 2) Set the bender to make a 90<sup>o</sup> bend at | + | 2) Set the bender to make a 90<sup>o</sup> bend at 0.om end of material; Proceed to bend.<sup><small></small></sup>3) Set the bender to make a circular bend, of any size, 2" from previous bend; Proceed to bend. |
| − | |||
| − | 3) Set the bender to make a circular bend, of any size, 2" from previous bend; Proceed to bend. | ||
Revision as of 18:02, 12 April 2019
A hand bender is a machine used to bend wire, solid stock, and tubing. The bender comes with multiple dyes for different types of bends.
The current Ace of the Hand Bender is Needed (Makerhub@georgefox.edu).
*Currently the bender stand is not bolted to the floor, so you can really only bend light materials like 1/8" thick aluminum. If you want to bend thicker material, you will need help from someone to hold the table. In the future we will be bolting the bender to a sturdier spot.
3 commandments
Stuff about the 3 commandments.
Documentation
Resources
Training
Look at "Art of Bending" document to find out how to set up the equipment. Then Watch the "Simple Bend" video to see how the equipment functions.
Procedure
1) Cut a piece of .5"x.125" aluminum to a length of 6".
2) Set the bender to make a 90o bend at 0.om end of material; Proceed to bend.3) Set the bender to make a circular bend, of any size, 2" from previous bend; Proceed to bend.