Difference between revisions of "Blast Cabinet"
Jump to navigation
Jump to search
| Line 26: | Line 26: | ||
= Procedures: = | = Procedures: = | ||
| + | # Open the cabinet door. | ||
# Put the parts you wish to sandblast into the cabinet | # Put the parts you wish to sandblast into the cabinet | ||
# After placing parts in the cabinet, make sure secure the door with latch properly | # After placing parts in the cabinet, make sure secure the door with latch properly | ||
| Line 31: | Line 32: | ||
# Locate the power switch and turn on the sandblaster | # Locate the power switch and turn on the sandblaster | ||
# Insert your arms into the gloves and position yourself to have a clear view into the cabinet | # Insert your arms into the gloves and position yourself to have a clear view into the cabinet | ||
| + | # Picking up the parts and gun, manually aim where you need to clean on the parts | ||
# Position your foot in the foot pedal mechanism. Once pedal is depressed sand will blast out of the gun | # Position your foot in the foot pedal mechanism. Once pedal is depressed sand will blast out of the gun | ||
| − | |||
# When finished, turn the machine off | # When finished, turn the machine off | ||
# Before removing parts, wait 5-10 mins for the dust in the cabinet to settle | # Before removing parts, wait 5-10 mins for the dust in the cabinet to settle | ||
Revision as of 16:37, 12 April 2019
The 960-DLX DELUXE Skat Blast Cabinet has become one of "America's Favorites". TWO 90 watt floodlights and big 12" x 33" window for improved, brighter visibility when blasting. Plus, Skat Blast's C-35-M Foot-Pedal-Operated Power Gun and pickup tube system for a more powerful, even blast. Quiet Vac-50 HEPA Vacuum with HEPA Filtration collects 99.97% dust particles down to 0.3 microns.
The current Ace of the Blast Cabinet is Needed (Makerhub@georgefox.edu).
Documentation:
Procedures:
- Open the cabinet door.
- Put the parts you wish to sandblast into the cabinet
- After placing parts in the cabinet, make sure secure the door with latch properly
- Turn on the cabinet light and fan. Switches located…………….
- Locate the power switch and turn on the sandblaster
- Insert your arms into the gloves and position yourself to have a clear view into the cabinet
- Picking up the parts and gun, manually aim where you need to clean on the parts
- Position your foot in the foot pedal mechanism. Once pedal is depressed sand will blast out of the gun
- When finished, turn the machine off
- Before removing parts, wait 5-10 mins for the dust in the cabinet to settle
- Once you remove parts make sure to close cabinet door and power off the light and fan
Warnings:
- Make sure the cabinet door is closed before stepping on the air activation pedal.
- Keep the activation pedal clear when loading the cabinet.
- After you are done using the blaster let the dust in the cabinet settle prior to opening the door.
- Inhaling the dust produced by the cabinet is bad for your lungs.
- Never point the nozzle towards your hand or the window in the cabinet.