32
edits
Changes
Jump to navigation
Jump to search
→Procedure
Line 39:
Line 39:
==Procedure==
==Procedure==
−1) Cut a piece of .5"x.125" aluminum to a length of 4".
+1) Cut a piece of .5"x.125" aluminum to a length of 6".
−2) Set the bender to make a 90<sup><small></small>o</sup> bend at 1" from end of material; Proceed to bend.
+2) Set the bender to make a 90<sup>o</sup> bend at 2" from end of material; Proceed to bend.<sup><small></small></sup>
−3) Set the bender to make a circular bend, of any size, 1" from previous bend; Proceed to bend.
+3) Set the bender to make a circular bend, of any size, 2" from previous bend; Proceed to bend.