Difference between revisions of "Hand Bender"
Jump to navigation
Jump to search
| Line 33: | Line 33: | ||
== Training == | == Training == | ||
Look at "Art of Bending" document to find out how to set up the equipment. Then Watch the "Simple Bend" video to see how the equipment functions. | Look at "Art of Bending" document to find out how to set up the equipment. Then Watch the "Simple Bend" video to see how the equipment functions. | ||
| + | |||
| + | ==Procedure== | ||
| + | 1) Cut a piece of .5"x.125" aluminum to a length of 5". | ||
| + | |||
| + | 2) Set the bender to make a 90<sup><small></small>o</sup> bend at 1" from end of material; Proceed to bend. | ||
| + | |||
| + | 3) Set the bender to make a circular bend, of any size, 1" from previous bend; Proceed to bend. | ||
Revision as of 18:21, 4 March 2019
A hand bender is a machine used to bend wire, solid stock, and tubing. The bender comes with multiple dyes for different types of bends.
The current Ace of this machine is Needed (Makerhub@georgefox.edu, ?) ().
3 commandments
Stuff about the 3 commandments.
Documentation
Resources
Training
Look at "Art of Bending" document to find out how to set up the equipment. Then Watch the "Simple Bend" video to see how the equipment functions.
Procedure
1) Cut a piece of .5"x.125" aluminum to a length of 5".
2) Set the bender to make a 90o bend at 1" from end of material; Proceed to bend.
3) Set the bender to make a circular bend, of any size, 1" from previous bend; Proceed to bend.