Difference between revisions of "Slip Roller"
Jump to navigation
Jump to search
(→Safety) |
|||
| Line 37: | Line 37: | ||
#Insert your piece that you would like to roll between the rollers. | #Insert your piece that you would like to roll between the rollers. | ||
#Re-secure the top roller inside of the slot prior to rolling. | #Re-secure the top roller inside of the slot prior to rolling. | ||
| − | #Crank the crank till you have rolled to the desired radius. | + | #Crank the crank slowly till you have rolled to the desired radius. |
== Safety == | == Safety == | ||
| + | #Never put your finger in between the rollers as you could crush them. | ||
# | # | ||
Revision as of 16:10, 16 February 2019
A slip roller is a machine used to roll sheet metal with a formed radius. In addition to rolling sheet metal, the roller in the shop includes wire grooves for bending solid rod.
The current Ace of this machine is Needed (Makerhub@georgefox.edu, ?) ().
3 commandments
Stuff about the 3 commandments.
Documentation
Resources
Training
Rolling Steps
- Adjust the radius by turning the knobs on the front of the machine.
- Adjust the tension using the knobs on the back of the machine for materials of different sizes.
- Begin by pulling the right side of the top roller out of its slot.
- Insert your piece that you would like to roll between the rollers.
- Re-secure the top roller inside of the slot prior to rolling.
- Crank the crank slowly till you have rolled to the desired radius.
Safety
- Never put your finger in between the rollers as you could crush them.