45
edits
Changes
Jump to navigation
Jump to search
→Troubleshooting: Added point for inconsistent arc
Line 104:
Line 104:
* The welding process is burning through the work piece - Double check the welding parameters chart to ensure the wire speed and voltage are correct.
* The welding process is burning through the work piece - Double check the welding parameters chart to ensure the wire speed and voltage are correct.
* Trouble starting the weld at the correct distance - Trim the wire to around 1/4" so that the gun can be closer to the work piece.
* Trouble starting the weld at the correct distance - Trim the wire to around 1/4" so that the gun can be closer to the work piece.
+* Inconsistent arc - Check that your workpiece is clean of thick mill scale. The contact tip may also need replacing, contact supervisor or tech.
* Wire feeding at an erratic rate - Contact the supervisor or tech if you experience this issue.
* Wire feeding at an erratic rate - Contact the supervisor or tech if you experience this issue.