Difference between revisions of "Rotary Punch"
| Line 35: | Line 35: | ||
Here is an example of this piece of equipment being used. | Here is an example of this piece of equipment being used. | ||
| − | https://www.youtube.com/watch?v=nPMle_WkP3k | + | |
| + | {{#evu:https://www.youtube.com/watch?v=nPMle_WkP3k}} | ||
==Documentation== | ==Documentation== | ||
Revision as of 14:06, 7 August 2020
Make: Di-Acro
Model: Turret Punch No. 12
Serial Number: BD-1291
Ace: Needed (Makerhub@georgefox.edu).
Location: Machine Shop
Description
A rotary punch, also known as a turret punch. The punch in the shop is a "C Frame" style punch and is used to shear holes in materials. The turret would normally contain a variety of punches of different shapes and sizes. The selected punch and die required needs to be properly aligned before use. You can use the laser to cut any shapes needed as the rotary punch is not currently setup with any dies.
Here is an example of this piece of equipment being used.
Documentation
Terminology
- Punch-
- Die-
- Turret-
User Manual Media:Rotary_Punch_Manual.pdf
Training
Operation
Insert Text
Demonstration
Insert text
General Procedure
Insert text
Safety
- Make sure to keep your hands and fingers away from all pinch points.
Certification
Troubleshooting
Maintenance
General maintenance
There are several grease fittings located on the machine that need to be greased. The punches also need to be oiled as needed by the technician.
Specific Maintenance Tasks
| Maintenance Procedure | Frequency | Done By |
|---|---|---|
| Sample | Sample | Sample |