Difference between revisions of "Bead Roller"
Jump to navigation
Jump to search
Line 43: | Line 43: | ||
== Bead Roll Art == | == Bead Roll Art == | ||
In addition to strengthening sheet metal, the bead roller can also be used to create artistic patterns such as the one below. | In addition to strengthening sheet metal, the bead roller can also be used to create artistic patterns such as the one below. | ||
+ | [[File:Bead Roll Art.png|600x600px]] <br /> <br /> |
Revision as of 14:58, 16 March 2019
A bead roller is a type of roller used for forming and reinforcing sheet metal. Sheet metal is rolled between two beads (or other dies) to give it extra strength and rigidity. The bead roller in the shop is the Mittler 210-24M.
The current Ace of the Bead Roller is Needed (Makerhub@georgefox.edu).
Documentation
Resources
- Video showing the bead rolling process.
Training
Rolling Steps
- Begin by tracing the area of your desired bead on the sheet metal.
- Next, loosen the tensioning bolt, and place the sheet metal between the two forming dies.
- Tighten the tensioning bolt by turning it two revolutions after both dies contact the sheet metal. Make sure the sheet metal is contacting the traced line where you would like the bead to begin.
- Turn the handle on the opposite side as you guide the metal through the dies. It may be easier to have a second person do this to allow the first person to more accurately guide the sheet metal through the beads.
Maximum Capacity
- 19 Ga (.040”) Mild Steel
- 16 Ga (.050”) Aluminum
- 21 Ga (.035”) Stainless
Bead Roll Art
In addition to strengthening sheet metal, the bead roller can also be used to create artistic patterns such as the one below.
600x600px