Difference between revisions of "Heavy Duty Sewing Machine"
| Line 50: | Line 50: | ||
* Bobbin: The metal drum that holds the lower thread. | * Bobbin: The metal drum that holds the lower thread. | ||
* Foot: | * Foot: | ||
| − | [[File:S-and-z-twist-figure.png|250px|thumb|right|The difference between S-and- | + | |
| + | [[File:S-and-z-twist-figure.png|250px|thumb|right|The difference between S-twist and Z-twist thread.]] | ||
| + | |||
| + | On the Consew you must use left twisted thread for upper/needle thread, but you can use either right or left twisted thread for lower/bobbin thread. | ||
| + | |||
User Manual | User Manual | ||
Revision as of 14:54, 19 January 2023
Make: Consew
Model: 206RB
Serial Number:
Ace: Dan Schutter (text him at 503-317-5614) ().
Location: The Hub
Description
The wiki page for the heavy duty sewing machine is coming soon. This is a place holder for the future.
Here is an example of this piece of equipment being used.
Here is an example of this piece of equipment being used.
Documentation
Terminology
- Bobbin: The metal drum that holds the lower thread.
- Foot:
On the Consew you must use left twisted thread for upper/needle thread, but you can use either right or left twisted thread for lower/bobbin thread.
User Manual
Training
Operation
Make sure the dots on the handwheel and frame are aligned before removing or inserting a bobbin.
Demonstration
Insert text
General Procedure
Insert text
Safety
Make sure the power switch is off before threading the machine or doing anything other than sewing. Leave any other maintenance to the ACE or technician. Keep fingers out of the needle path. This machine can sew though thick material at a rapid pace. Always remove the bobbin from the machine before using the winding mechanism.
Certification
Canvas Quiz
Troubleshooting
Maintenance
General maintenance
Insert text
Specific Maintenance Tasks
| Maintenance Procedure | Frequency | Done By |
|---|---|---|
| Oil Machine Locations | As Needed | Tech |