Changes

Jump to navigation Jump to search
34 bytes removed ,  4 years ago
no edit summary
Line 31: Line 31:     
The Powermatic planer contains a 5HP motor and 20" planing capacity that will handle the most demanding work. The helical cutterhead provides quieter operation and finer finishing than conventional systems, and the four-sided knife inserts seat themselves without requiring a set-up gauge. The 5" dust port connects easily to any dust collector. Used to remove material from wood, as well as squaring to create straight pieces. <ref>Description adapted from [http://www.powermatic.com/us/en/p/209hh-20-planer-5hp-3ph-230-460v/1791316 Powermatic].</ref>
 
The Powermatic planer contains a 5HP motor and 20" planing capacity that will handle the most demanding work. The helical cutterhead provides quieter operation and finer finishing than conventional systems, and the four-sided knife inserts seat themselves without requiring a set-up gauge. The 5" dust port connects easily to any dust collector. Used to remove material from wood, as well as squaring to create straight pieces. <ref>Description adapted from [http://www.powermatic.com/us/en/p/209hh-20-planer-5hp-3ph-230-460v/1791316 Powermatic].</ref>
The Planer is used to trim wood boards down by precise measurements, never more than 1/16 of an inch on each pass. ''[deleted redundant sentences]'' The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The solid cast iron base, table and head are designed for production. The 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated infeed and fine groove outfeed rollers ensure a smooth feed. The precision ground and polished cast iron table rides on four steel columns giving it plenty of support for the larger workpiece. Heavy cast iron extension wings ensure a flat, smooth cut.
+
The Planer is used to trim wood boards down by precise measurements, never more than 1/16 of an inch on each pass. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The solid cast iron base, table and head are designed for production. The 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated infeed and fine groove outfeed rollers ensure a smooth feed. The precision ground and polished cast iron table rides on four steel columns giving it plenty of support for the larger workpiece. Heavy cast iron extension wings ensure a flat, smooth cut.
 
{{#evu:https://www.youtube.com/watch?v=NcGqyujNYlM}}
 
{{#evu:https://www.youtube.com/watch?v=NcGqyujNYlM}}
 
{{#evu:https://www.youtube.com/watch?v=oRK0yW4CcWs}}
 
{{#evu:https://www.youtube.com/watch?v=oRK0yW4CcWs}}
80

edits

Navigation menu