Difference between revisions of "Sheet Metal Shear"

From maker-hub
Jump to navigation Jump to search
Line 47: Line 47:
 
*Hold Down Handles:
 
*Hold Down Handles:
  
User Manual
+
[https://www.sawstop.com/images/uploads/manuals/PCS%20Owners%20Manual%20Model%20PCS31230%20V5.0%2009-13.pdf User Manual]
  
 
==Training==
 
==Training==

Revision as of 10:48, 6 May 2020

Sheet Metal Shear icon
Sheet Metal Shear

Make: Peck, Stow & Wilcox Co.

Model: G-52

Ace: Brady Pfeiffer (bpfeiffer21@georgefox.edu).

Location: Machine Shop

Description

The shear is used for making straight cuts in sheet metal as well as other materials. The shearing blade is powered by applying force to the foot bar located in front of the machine. To prevent damage to yourself and or the machine make sure you obey the following rules:

  • Maximum aluminum material thickness you can cut with this machine is .07" x full width.
  • Maximum mild steel thickness you can cut with this machine is .06" x 12" wide
  • Maximum stainless steel thickness you can cut with this machine is .04" x 12" (ask before cutting stainless steel)
  • NEVER attempt to cut round stock or wire on the shear.
  • Plastics can be cut up to 1/8" thick x the blade width.
  • Ask Justin or Nick G. prior to cutting any other materials.
  • Always use the cam lock bar to hold material prior to cutting.

Here is an example of this piece of equipment being used.

Documentation

Terminology

  • Foot Pedal:
  • Hold Down:
  • Hold Down Handles:

User Manual

Training

Overview

For the demonstration you will need to show you have understanding of the machine use and setup. You will need select an appropriate piece of material for the demonstration and make a safe cut. By placing a mark on the material you can demonstrate your ability to align the blade to the cut line.

Demonstration

Insert text

General Procedure

Insert text

Safety

Fingers must be kept away from the blade at all times. Never place your hand or fingers near the blade.

Certification

Foxtale Course

Troubleshooting

Maintenance

General maintenance

The machine should be oiled periodically by the tech.

Specific Maintenance Tasks

Maintenance Procedure Frequency Done By
Sample Sample Sample