Difference between revisions of "Blast Cabinet"

Revision as of 13:22, 4 August 2019

Make: Skat Blast

Model: SC-40

Description

The 960-DLX DELUXE Skat Blast Cabinet has become one of "America's Favorites". TWO 90 watt floodlights and big 12" x 33" window for improved, brighter visibility when blasting. Plus, Skat Blast's C-35-M Foot-Pedal-Operated Power Gun and pickup tube system for a more powerful, even blast. Quiet Vac-50 HEPA Vacuum with HEPA Filtration collects 99.97% dust particles down to 0.3 microns.

Here is an example of this piece of equipment being used.

Documentation

Terminology

Insert terminology here

User Manual

Training

Overview

Insert Text

Demonstration

Blast stencil pattern on acrylic

General Procedure

Tape existing stencil to acrylic scrap
Open the cabinet door.
Place stencil/acrylic into sandblast cabinet
After placing parts in the cabinet, make sure secure the door with latch properly
Turn on the cabinet light and fan. Switch is located on the top left of the machine
Locate the power switch and turn on the sandblaster
Insert your arms into the gloves and position yourself to have a clear view into the cabinet
Picking up the parts and gun, manually aim where the stencil doesn't cover the acrylic
Position your foot in the foot pedal mechanism. Once pedal is depressed sand will blast out of the gun
When finished, turn the machine off
Before removing parts, wait 5-10 mins for the dust in the cabinet to settle
Once you remove parts make sure to close cabinet door and power off the light and fan

Safety

Make sure the cabinet door is closed before stepping on the air activation pedal.
Keep the activation pedal clear when loading the cabinet.
After you are done using the blaster let the dust in the cabinet settle prior to opening the door.
Inhaling the dust produced by the cabinet is bad for your lungs.
Never point the nozzle towards your hand or the window in the cabinet.

Certification

Foxtale Quiz

Troubleshooting

Maintenance

General maintenance

Insert text

Specific Maintenance Tasks

Maintenance Procedure	Frequency	Done By
Sample	Sample	Sample

@@ Line 17: / Line 17: @@
 [[{{#show: {{FULLPAGENAME}}|?Has icon|link=none}}|100px|left|top|{{#show: {{FULLPAGENAME}}|?Has icondesc}}]]
 [[{{#show: {{FULLPAGENAME}}|?Has image|link=none}}|300px|thumb|upright=1.5|{{#show: {{FULLPAGENAME}}|?Has imagedesc}}]]
-The 960-DLX DELUXE Skat Blast Cabinet has become one of "America's Favorites". TWO 90 watt floodlights and big 12" x 33" window for improved, brighter visibility when blasting. Plus, Skat Blast's C-35-M Foot-Pedal-Operated Power Gun and pickup tube system for a more powerful, even blast. Quiet Vac-50 HEPA Vacuum with HEPA Filtration collects 99.97% dust particles down to 0.3 microns.
-The current Ace of the {{PAGENAME}} is '''{{#show: {{PAGENAME}} |?Has ace.Has name}}''' ({{#show: {{PAGENAME}} |?Has ace.Has email address}}).<br />
-__TOC__
-= Documentation: =
-* [http://www.skatblast.com/960-dlx-deluxe-cabinet.html Product Page]
-This video shows a good example of using the blast cabinet.
-{{#evu:https://www.youtube.com/watch?time_continue=4&v=opduG1yIHPE}}
-= Procedures: Blast stencil pattern on acrylic scrap =
-# Tape existing stencil to acrylic scrap
-# Open the cabinet door.
-# Place stencil/acrylic into sandblast cabinet
-# After placing parts in the cabinet, make sure secure the door with latch properly
-# Turn on the cabinet light and fan. Switch is located on the top left of the machine
-# Locate the power switch and turn on the sandblaster
-# Insert your arms into the gloves and position yourself to have a clear view into the cabinet
-# Picking up the parts and gun, manually aim where the stencil doesn't cover the acrylic
-# Position your foot in the foot pedal mechanism. Once pedal is depressed sand will blast out of the gun
-# When finished, turn the machine off
-# Before removing parts, wait 5-10 mins for the dust in the cabinet to settle
-# Once you remove parts make sure to close cabinet door and power off the light and fan
-=== Certification ===
-==== FoxTale Course ====
-To obtain certification for using the Blast Cabinet in the Welding Lab, you will need to complete the [https://foxtale.georgefox.edu/moodle/course/view.php?id=23483 Foxtale course: Maker Hub - Blast Cabinet]. This course contains a quiz with questions. When the quiz has been completed, you can sign up to perform the Blast Cabinet demonstration.
-= Warnings: =
-#Make sure the cabinet door is closed before stepping on the air activation pedal.
-#Keep the activation pedal clear when loading the cabinet.
-#After you are done using the blaster let the dust in the cabinet settle prior to opening the door.
-#Inhaling the dust produced by the cabinet is bad for your lungs.
-#Never point the nozzle towards your hand or the window in the cabinet.
 Make: {{#show: {{PAGENAME}} |?Has make}}