473
edits
Changes
Jump to navigation
Jump to search
Line 93:
Line 93: + Line 109:
Line 110: +
no edit summary
# Stack work pieces neatly.
# Stack work pieces neatly.
# Coil up all cables of torches used and neatly place on the bottom shelf of the cart; leaving the space better than you found it if possible.
# Coil up all cables of torches used and neatly place on the bottom shelf of the cart; leaving the space better than you found it if possible.
# Ensure that the cables are not tangled and do not pull on them if they are. This can damage the cables.
==Safety==
==Safety==
==Troubleshooting==
==Troubleshooting==
* The most common issue with this device is the AR flickering on and off and this is extremely annoying because the welding process is halted each time this occurs. To fix this pay close attention to the red arrows on the side of the screen and move your view angle around until they disappear signify that the helmet is oriented with the coupon correctly. If the problem persists, press the AR button to perform a lighting calibration. You can also experiment with different brightness levels for the lights on the front of the helmet.
* The most common issue with this device is the AR flickering on and off and this is extremely annoying because the welding process is halted each time this occurs. To fix this pay close attention to the red arrows on the side of the screen and move your view angle around until they disappear signify that the helmet is oriented with the coupon correctly. If the problem persists, press the AR button to perform a lighting calibration. You can also experiment with different brightness levels for the lights on the front of the helmet.
* If at any point an unfamiliar alert pops up on the screen, consult the Ace or the user manual to determine the severity of the error and how to fix it.
==Maintenance==
==Maintenance==