Changes

# Unplug the extension cord and leave it coiled up neatly underneath the cart.

# Unplug the extension cord and leave it coiled up neatly underneath the cart.

# Stack work pieces neatly.

# Stack work pieces neatly.

# Coil up all cables of torches used and neatly place on the bottom shelf of the cart.

# Coil up all cables of torches used and neatly place on the bottom shelf of the cart; leaving the space better than you found it if possible.  

==Safety==

==Safety==

==Troubleshooting==

==Troubleshooting==

* The most common issue with this device is the AR flickering on and off and this is extremely annoying because the welding process is halted each time this occurs. To fix this pay close attention to the red arrows on the side of the screen and move your view angle around until they disappear signify that the helmet is oriented with the coupon correctly. If the problem persists, press the AR button to perform a lighting calibration.  

* The most common issue with this device is the AR flickering on and off and this is extremely annoying because the welding process is halted each time this occurs. To fix this pay close attention to the red arrows on the side of the screen and move your view angle around until they disappear signify that the helmet is oriented with the coupon correctly. If the problem persists, press the AR button to perform a lighting calibration. You can also experiment with different brightness levels for the lights on the front of the helmet.  

==Maintenance==

==Maintenance==