Changes

Jump to navigation Jump to search
Line 79: Line 79:  
# There are two monitors above the pick and place machine. You’ll want to have your Altium Schematic on one and the altium PCBDoc opened up so you can follow along as you’re placing and double checking things while you’re going.
 
# There are two monitors above the pick and place machine. You’ll want to have your Altium Schematic on one and the altium PCBDoc opened up so you can follow along as you’re placing and double checking things while you’re going.
 
# Don’t try to get the component exactly at the location of the pads without the break. It’s quicker if you get it in the general area and use the fine adjustments knob after placing the break.
 
# Don’t try to get the component exactly at the location of the pads without the break. It’s quicker if you get it in the general area and use the fine adjustments knob after placing the break.
# Pivot the micro camera to view alignments on both the x and y axes (again, the fine adjustments knobs are used here).
+
# Pivot the micro camera to view alignments on both the x and y axes (again, the fine adjustment knobs are used here).
 
# If your tip is having a hard time keeping the component secure, try a bigger one.
 
# If your tip is having a hard time keeping the component secure, try a bigger one.
  
479

edits

Navigation menu