Difference between revisions of "Ring Roller"
Jump to navigation
Jump to search
| Line 37: | Line 37: | ||
#Turn the crank to roll the metal bar or rod. | #Turn the crank to roll the metal bar or rod. | ||
#Start with a large radius and continue to make the radius smaller every time you roll. If you attempt to roll a small radius all at once, the rod may make a corkscrew shape instead of a circle. | #Start with a large radius and continue to make the radius smaller every time you roll. If you attempt to roll a small radius all at once, the rod may make a corkscrew shape instead of a circle. | ||
| + | |||
| + | === Demonstration === | ||
| + | #Cut a 4 inch long piece of 1" x 1/8" aluminium. | ||
| + | #Bend the piece to the smallest possible radius. | ||
Revision as of 16:13, 9 March 2019
A ring roller is a machine used to roll steel material by forcing the material through through rollers, also called dyes. The rollers can be adjusted to form different radii.
The current Ace of this machine is Needed (Makerhub@georgefox.edu, ?) ().
3 commandments
Stuff about the 3 commandments.
Documentation
Resources
Training
Rolling Steps
- Adjust the knob on the left to get a large radius.
- Adjust the knob on the right to adjust for the size of the bar.
- Insert the bar between the rollers.
- Turn the crank to roll the metal bar or rod.
- Start with a large radius and continue to make the radius smaller every time you roll. If you attempt to roll a small radius all at once, the rod may make a corkscrew shape instead of a circle.
Demonstration
- Cut a 4 inch long piece of 1" x 1/8" aluminium.
- Bend the piece to the smallest possible radius.