Changes

The wood shop is a 975 square foot space. It contains a table saw, radial arm miter saw, planer, jointer, drill press, bandsaw, scroll saw, oscillating spindle sander, combination belt and disc sander, lathe, and other hand tools. It also contains a large CNC router. The shop is also equipped with compressed air quick connections for powering tools and machines. There are two air filtration units located up high in the ceiling. When producing wood dust turn on the filtration units with the white remote control. Theses do a good job of removing a large percentage of the wood dust from the air.   [[File:Wood_Shop.jpg|300px|thumb|The Wood Shop]]

The wood shop is a 975 square foot space. It contains a table saw, radial arm miter saw, planer, jointer, drill press, bandsaw, scroll saw, oscillating spindle sander, combination belt and disc sander, lathe, and other hand tools. It also contains a large CNC router. The shop is also equipped with compressed air quick connections for powering tools and machines. There are two air filtration units located up high in the ceiling. When producing wood dust turn on the filtration units with the white remote control. These do a good job of removing a large percentage of the wood dust from the air. The [[Dust Collector|dust collectors]] are not considered equipment, but you should know how to use them if you are working in the wood shop.[[File:Wood_Shop.jpg|300px|thumb|The Wood Shop]]

The current Maker Hub Student Staff in the {{PAGENAME}} is '''{{#show: {{PAGENAME}} |?Has ace.Has name}}''' ({{#show: {{PAGENAME}} |?Has ace.Has email address}}). <br />

The current Maker Hub Student Staff in the {{PAGENAME}} is '''{{#show: {{PAGENAME}} |?Has ace.Has name}}''' ({{#show: {{PAGENAME}} |?Has ace.Has email address}}). <br />

{{#set:

{{#set:

   |Is facility=True

   |Is facility=True

   |Has ace=David Demaree;ddemaree17@georgefox.edu

   |Has ace=Needed;Makerhub@georgefox.edu

   |Has certification=https://foxtale.georgefox.edu/moodle/course/view.php?id=31320

   |Has certification=https://georgefox.instructure.com/courses/1255

}}

}}

=Schedule=

=Schedule=

=Equipment Overview =

=Equipment Overview =

{{#ask:

{{#ask:

All the same safety rules from the machine shop apply:

All the same safety rules from the machine shop apply:

* Safety glasses must be worn when crossing the yellow line in shop area marked on the floor.

*Safety glasses must be worn when crossing the yellow line in shop area marked on the floor.

* No horseplay in the shop.

* No horseplay in the shop.

Woodworking is dangerous. Be careful.  

Woodworking is dangerous. Be careful.  

=== Gluing ===

===Gluing===

Glue joints (when done correctly) will create a bond stronger than the wood itself. To create a strong glue joint follow this general procedure. It is worth noting that gluing end grain yields a very weak glue joint and should be avoided.

Glue joints (when done correctly) will create a bond stronger than the wood itself. To create a strong glue joint follow this general procedure. It is worth noting that gluing end grain yields a very weak glue joint and should be avoided.

# Ensure that both surfaces that you wish to glue are flat or mate together well.

# Ensure that both surfaces that you wish to glue are flat or mate together well.

# Recognize that once you start applying glue you are on a clock to finish setting up the glue joint before the set time.

# Recognize that once you start applying glue you are on a clock to finish setting up the glue joint before the set time.

# Apply a bead of glue on one surface of your glue joint. Then, spread out that glue into a thin film using your fingers, a glue brush, or a glue roller.  

# Apply a bead of glue on one surface of your glue joint. Then, spread out that glue into a thin film using your fingers, a glue brush, or a glue roller.  

# Repeat step 5 for the other surface of your glue joint such that both surfaces have a thin, even film of glue.'

# Repeat step 5 for the other surface of your glue joint such that both surfaces have a thin, even film of glue.

# Quickly use a paper towel to wipe your fingers clean of glue. The goal here is to remove most of the wet glue so it doesn't get spread all over your lumber. Do NOT take the time to clean all of the glue.

# Quickly use a paper towel to wipe your fingers clean of glue. The goal here is to remove most of the wet glue so it doesn't get spread all over your lumber. Do NOT take the time to clean all of the glue.

# Using the clamps you already gathered, clamp your glue joint together  

# Using the clamps you already gathered, clamp your glue joint together  

# You can never have too many clamps.

# You can never have too many clamps.

# After 5-10 minutes, wipe up the excess glue squeeze out.  

# After 5-10 minutes, wipe up the excess glue squeeze out.

=== General Knowledge ===

===General Knowledge===

* The Table Saw is the center of the shop because it is the most frequently used tool.  

* The Table Saw is the center of the shop because it is the most frequently used tool.  

* Be aware of people and what they are doing around you.  

* Be aware of people and what they are doing around you.  

* Be aware of what is on the floor around you. Don't trip on dust collector hoses or electrical cords.  

* Be aware of what is on the floor around you. Don't trip on dust collector hoses or electrical cords.  

* May of the machines that remove material are very load.  Wear ear protection when needed.  

* May of the machines are very loud.  Wear ear protection when needed.  

* If something feels like it could be dangerous ask a supervisor before attempting.

* If something feels like it could be dangerous ask a supervisor before attempting.

{{#ask:

{{#ask:

  [[Is equipment::True]]

  [[Is equipment::True]]

  |imageproperty=Has icon

  |imageproperty=Has icon

}}

}}