Difference between revisions of "Weller WES51"

From maker-hub
Jump to navigation Jump to search
Line 23: Line 23:
[File:soldersucker.jpg|Solder Sucker bulb]
[[File:soldersucker.jpg|Solder Sucker bulb]]
[File:wire_strippers.jpg|Wire Strippers]
[[File:wire_strippers.jpg|Wire Strippers]]
[File:needle_nose_pliers.jpg|Needle Nose Pliers]
[[File:needle_nose_pliers.jpg|Needle Nose Pliers]]
[File:flush_cutters.jpg|Flush Cutters]
[[File:flush_cutters.jpg|Flush Cutters]]
[File:solder_heat_sink.jpg|red Heat Sink]
[[File:solder_heat_sink.jpg|red Heat Sink]]
[File:X-ACTO_knife.jpg|X-ACTO knife]
[[File:X-ACTO_knife.jpg|X-ACTO knife]
[File:wire_brush.jpg|Wire Brush]
[[File:wire_brush.jpg|Wire Brush]]
[File:60_40_solder.jpg|60/40 Solder]
[[File:60_40_solder.jpg|60/40 Solder]]
[File:solder_flux.jpg|Solder Flux]
[[File:solder_flux.jpg|Solder Flux]]
[File:flux_pen.jpg|Flux Pen]
[[File:flux_pen.jpg|Flux Pen]]
[File:tip_activator.gif|Tip Activator]
[[File:tip_activator.gif|Tip Activator]]
== Accessories ==
== Accessories ==

Revision as of 09:50, 14 March 2018

Soldering Iron Icon
Weller WES51

The Weller WES51 is the standard Soldering Iron used in the Maker Hub. The Iron includes the WES series power unit, PES51 soldering pencil, PH50 stand, and sponge. A PW50 probe is available for checkout that allows the user to set (or unset) the soldering temperature.

Each iron is mounted to a tray along with a soldering kit. Each kit contains the following:

Solder Sucker bulb Tweezers Wire Strippers Needle Nose Pliers Flush Cutters red Heat Sink [[File:X-ACTO_knife.jpg|X-ACTO knife] Wire Brush 60/40 Solder Solder Flux Flux Pen Tip Activator


The Weller station is used with the following accessories:

  • Tips
  • Solder
  • Tinner
  • Braid



Training for the Weller is included in the Soldering Irons (General) training. Additional instructional videos for the Weller are here.




The Weller site for this model is at http://www.weller-toolsus.com/soldering/systems/weller-wes51-station-50-60w-120v-wes51.html.