Difference between revisions of "Vinyl Printer+Cutter"
(Added Link to BN-20 Master Guide) |
(Basic Info addition) |
||
| Line 17: | Line 17: | ||
Vinyl Printing is the process of applying ink to vinyl sheets to produce graphics. The maker hub has a Roland BN-20 printer/cutter. It uses a conventional inkjet printing method with solvent based inks. | Vinyl Printing is the process of applying ink to vinyl sheets to produce graphics. The maker hub has a Roland BN-20 printer/cutter. It uses a conventional inkjet printing method with solvent based inks. | ||
| − | WARNING: DO NOT unplug or turn off the printer | + | '''⚠ WARNING:''' DO NOT unplug or turn off the printer using the rear cutoff switch for more than a couple hours. This will cause detrimental damage to the print head. However, using the front power button is safe. |
== Documentation == | == Documentation == | ||
| + | The Master Guide covers every basic thing about the BN-20. It has instruction on printing, cutting, maintenance, and calibration. Look over this if you are new to the BN-20. | ||
| + | |||
[http://support.rolanddga.com/Docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/BN-20_USE_EN_R2.pdf Master Guide] | [http://support.rolanddga.com/Docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/BN-20_USE_EN_R2.pdf Master Guide] | ||
== Training == | == Training == | ||
| + | The following is a description of the steps for printing from the BN-20 | ||
| + | |||
| + | === Design === | ||
| + | The first step is to get your graphics ready for printing. Whether you get your graphics from the internet or deign them in a program similar to Adobe Illustrator, it will need to be imported into Adobe Illustrator for the process described here. These steps could be taken in CorelDraw as well (refer to documentation), but this section does not cover that. | ||
Revision as of 13:51, 6 March 2019
"(???)" is not in the list (Cloth, Crafts, Electronics, Leather, Metal, Painting, Plastic, Vinyl, Wood) of allowed values for the "Is used in domain" property.
Vinyl Printing is the process of applying ink to vinyl sheets to produce graphics. The maker hub has a Roland BN-20 printer/cutter. It uses a conventional inkjet printing method with solvent based inks.
⚠ WARNING: DO NOT unplug or turn off the printer using the rear cutoff switch for more than a couple hours. This will cause detrimental damage to the print head. However, using the front power button is safe.
Documentation
The Master Guide covers every basic thing about the BN-20. It has instruction on printing, cutting, maintenance, and calibration. Look over this if you are new to the BN-20.
Training
The following is a description of the steps for printing from the BN-20
Design
The first step is to get your graphics ready for printing. Whether you get your graphics from the internet or deign them in a program similar to Adobe Illustrator, it will need to be imported into Adobe Illustrator for the process described here. These steps could be taken in CorelDraw as well (refer to documentation), but this section does not cover that.