Changes

Jump to navigation Jump to search
531 bytes removed ,  4 months ago
Line 35: Line 35:  
Here are some safety instructions for the {{PAGENAME}}. Remember... SAFETY FIRST!!!
 
Here are some safety instructions for the {{PAGENAME}}. Remember... SAFETY FIRST!!!
 
* Always be aware of the position of the clamp handle and the counterweight. They are heavy and can swing back suddenly causing serious body or head injuries.   
 
* Always be aware of the position of the clamp handle and the counterweight. They are heavy and can swing back suddenly causing serious body or head injuries.   
* Always make sure that there is plenty of space between the cutting tool and the work piece before turning on the mill. If the tool comes into contact with the work piece before getting up to speed and is set deeper than the maximum cutting depth, things will break.  
+
* Keep hands and fingers away from the rolls when the machine is in operation.  
* At times your work piece may be obscured by metal chips while cutting. Do not remove them while the machine is running. Turn off the mill, wait till it comes to a complete stop, and then remove the chips. There are some brushes on the tool rack that may be helpful for removing stubborn chips.   
+
* Keep hands and fingers clear of any gears or mechanisms. Make sure guard is in place before operating machine.
* The milling process is great at creating sharp edges. Be aware of this when handling the work piece and make sure to deburr any sharp edges.
+
* Keep hands and fingers from between the roller and die when bending materials to avoid possible injury.
* Never make contact with the cutters as they are razor sharp and will cut you.
  −
* Never pass your hand under a cutter.
      
==Description==
 
==Description==
124

edits

Navigation menu