Sheet Metal Shear
Revision as of 20:53, 1 February 2019 by Nbloomquist17 (talk | contribs)
The shear in the shop is the Pexto G-52 Foot Squaring Shear. Squaring shears, like the one shown to the left, are used to cut sheet metal to a usable size. This shear is foot operated and can cut stock that is a maximum of 52 inches in width and 16-gauge in thickness.
Resources
Training
Shearing Steps
- Always
Safety
- Never ever put your fingers in the path of the blade past the guard unless you want your fingers cut off!!
- Never leave anything on the shear.