Rework Station

From maker-hub
Revision as of 14:22, 13 June 2019 by Mwagner16 (talk | contribs)
Jump to navigation Jump to search
Rework Station.jpg

ZT-2, ZT-3, ZT-1-CLS-DPU, Hakko FR-301, Quick861DW

Solder Rework Station.png

Make: Zephyrtronics

Model: ZT-2, ZT-3, ZT-1-CLS-DPU, Hakko FR-301, Quick861DW

Ace: Needed ().

Location: PCB Lab


Description

The Rework Station is essential for fixing what you messed up during the fabrication process. Consisting of an Air Bath, Air Pencil, and Air Pick, the Rework Station allows you heat up a specific area of the PCB and make modifications, whether that means adding/removing some solder on the pads, rotating a component, or completely replacing a component. Other tools are available for similar purposes, such as a desoldering gun, and an additional heat gun for larger components.


Documentation

Terminology


User Manual

Training

Overview

Insert Text

Demonstration

To show a complete knowledge of the Air Bath, Air Pencil, Air Pick, Desoldering Gun, and Heat Gun, the student will have a PCB prepared and perform tasks with the station as a whole. Using the Air Bath, Air Pencil, and Air Pick, students will mount a small SMD (Surface Mount Device), solder it on, and then remove it. Using the Desoldering Gun, students will remove a soldered through hole component. Using the Heat Gun, students will mount a larger SMD, solder it on, and then remove it.

General Procedure

Insert text

Safety

Insert text

Certification

Foxtale Quiz

Troubleshooting

Maintenance

General maintenance

Insert text

Specific Maintenance Tasks

Maintenance Procedure Frequency Done By
Sample Sample Sample
Rework Station Icon
The Rework Station

The current Ace of the Rework Station is Needed ().





What is the Rework Station?

The rework station is a collection of tools used for heating up printed circuit boards to remove surface mount components or touch up soldering jobs. The tools vary from a board heater, to very precise pin-point heating tools.

Documentation

Training

Terminology

PCB - Printed Circuit Board

SMD - Surface Mount Device

SMT - Surface Mount Technology

Heat Gun- A soldering iron-like tool that blows out hot air through a variable sized hole (often variable through interchangeable tips).

Helping Hands - A tool that grabs onto your PCB with little clips.

Soldering - The process of melting a tin-lead compound of metal to secure pins and leads of electronic components onto the terminals of a printed circuit board.

Zephyrtronics

ZT-1-CLS-DPU Airbath

ZT-2 Air Pencil

ZT-3 Air Pick

Hakko FR-301

Quick-861DW