479
edits
Changes
Jump to navigation
Jump to search
Line 71:
Line 71: − + + + Line 99:
Line 101: − +
no edit summary
==Troubleshooting==
==Troubleshooting==
There are little to no issues to run into while using the oven. The most common issue is failure to select the correct profile, which results in non-hardened traces and pads. Remember, Green is V1 Ink, Orange is V1 Paste, and blue is SN63Pb37. If this happens, simply bake the board again using the correct profile.
There are little to no issues to run into while using the oven. The most common issue is failure to select the correct profile, which results in non-hardened traces and pads. Remember, Green is V1 Ink, Orange is V1 Paste, and blue is SN63Pb37. If this happens, simply bake the board again using the correct profile. In the event that something happens out of the ordinary, follow the table below.
[[File:...ovenTroubleshooting.png|none|thumb]]
==Maintenance==
==Maintenance==
* [https://www.lpkfusa.com/products/pcb_prototyping/smt_assembling/protoflow_s/ Product Home Page]
* [https://www.lpkfusa.com/products/pcb_prototyping/smt_assembling/protoflow_s/ Product Home Page]
* [[Media:protoflow_datasheet.pdf|Datasheet]]
* [https://cdme.osu.edu/sites/default/files/uploads/lpkf_protoflow_s_user_manual_eng_v2.11.pdf Datasheet]