124
edits
Changes
Jump to navigation
Jump to search
Line 27:
Line 27: + + + + + + + + + + + Line 86:
Line 97: − − ==Safety== − # Only cut steel and aluminum. − # Never cut any coated materials − # Don't attempt to cut with the compressed air off − # Make sure the vent hood is on and placed near your working area. This will help evacuate the smoke. − # Arc rays can burn your eyes and skin. Wear a welding helmet and there should be no bare skin exposed. − # Never walk on the hoses or ground cable as this could cause damage to the machine. − # Never pull the trigger on the torch unless you are cutting material as this will reduce the life of the nozzle and electrode.
no edit summary
Location: {{#show: {{PAGENAME}} |?Is located in facility}}
Location: {{#show: {{PAGENAME}} |?Is located in facility}}
==Safety First==
[[File:Safety First HD2.png|left|150px]]
Here are some safety instructions for the {{PAGENAME}}. Remember... SAFETY FIRST!!!
* Only cut steel and aluminum.
* Never cut any coated materials
* Don't attempt to cut with the compressed air off
* Make sure the vent hood is on and placed near your working area. This will help evacuate the smoke.
* Arc rays can burn your eyes and skin. Wear a welding helmet and there should be no bare skin exposed.
* Never walk on the hoses or ground cable as this could cause damage to the machine.
* Never pull the trigger on the torch unless you are cutting material as this will reduce the life of the nozzle and electrode.
# Disconnect the ground clamp.
# Disconnect the ground clamp.
# Reset the space!
# Reset the space!
==Certification==
==Certification==