1,947
edits
Changes
Jump to navigation
Jump to search
Line 63:
Line 63: +
→General Procedure
# Always take your measurements at the thickest part of the board and adjust planer to match this thickness.
# Always take your measurements at the thickest part of the board and adjust planer to match this thickness.
# Do not attempt to run stock less than 12” in length through the planer.
# Do not attempt to run stock less than 12” in length through the planer.
# Do not attempt to plane material less than 1/4" thick.
# Turn the Thickness Planer on and wait until it has reached full speed before starting to plane your stock.
# Turn the Thickness Planer on and wait until it has reached full speed before starting to plane your stock.
# Only plane one piece of stock at a time. Stand to the side of the stock and feed it into the infeed opening. Let go of the stock when the roller takes hold of it. Never put your finger in the machine.
# Only plane one piece of stock at a time. Stand to the side of the stock and feed it into the infeed opening. Let go of the stock when the roller takes hold of it. Never put your finger in the machine.