Difference between revisions of "Mug Press"
| Line 35: | Line 35: | ||
====Terminology==== | ====Terminology==== | ||
| + | * SV - Stands for set value and is used to indicate the parameters that the press should be operating at. | ||
| + | * CV - Stands for present value and indicates the current value of the heat press parameters. | ||
| − | + | ==== [https://www.heatpressnation.com/media/user-guides/HPN/HPN-%20Signature-Series-Manual-2017-2.pdf User Manual] ==== | |
| − | |||
| − | User Manual | ||
==Training== | ==Training== | ||
====Overview==== | ====Overview==== | ||
| − | + | The operation of the mug press is pretty simple. First, select a heating element that fits your glass or mug and fasten it into place using the black screws. There is no formula for selecting the correct element other than putting your mug inside and making sure it fits snug. Adjust the pressure using the large black knobs so that there is a firm, even pressure over the mug. Next, set the time and temperature. Feel free to experiment with different values as there is not an exact formula, but for the heat transfer vinyl that is commonly used on the vinyl printer anywhere between 300°F and 325°F for 15 seconds works well. If the graphic begins to peel off when removing the paper then the time should be increased and if the graphic colors change when being applied the temperature should be decreased. Also it is important to use the Teflon sheets found in the t shirt heat press to prevent sticking to the heating element if using the plastic transfer paper. After the time and temperature are set place the mug in the element and clamp down. The timer will beep once the transfer is complete. For complete details see the general procedure. | |
====Demonstration==== | ====Demonstration==== | ||
| − | + | A mug or glass is required in order to perform a transfer on this machine which makes it difficult to perform simple test or demonstration transfers. Consequently, the demonstration will be pressing a graphic of choice onto a mug or glass. | |
====General Procedure==== | ====General Procedure==== | ||
| − | + | I | |
| − | |||
| Line 61: | Line 60: | ||
==Certification== | ==Certification== | ||
| − | Foxtale Quiz | + | [https://foxtale.georgefox.edu/moodle/course/view.php?id=31422 Foxtale Quiz] |
| + | |||
| + | Note that this quiz includes information from the heat press so make sure to review the heat press wiki before taking it. | ||
==Troubleshooting== | ==Troubleshooting== | ||
Revision as of 11:17, 17 June 2019
Make: Heat Press Nation
Model: HPN-SIG-MUG
Ace: Needed ().
Location: The Hub
Description
The HPN Signature Series Mug Cup Heat Press machine is a professional grade mug press designed to easily and efficiently heat transfer custom images onto standard mugs and water bottles. From small sized graphics such as names and logos to full wrap, edge to edge images the HPN Signature Series Mug Cup Heat Press delivers exceptionally high quality sublimation transfers every time. Here is an example of it in use:
Documentation
Terminology
- SV - Stands for set value and is used to indicate the parameters that the press should be operating at.
- CV - Stands for present value and indicates the current value of the heat press parameters.
User Manual
Training
Overview
The operation of the mug press is pretty simple. First, select a heating element that fits your glass or mug and fasten it into place using the black screws. There is no formula for selecting the correct element other than putting your mug inside and making sure it fits snug. Adjust the pressure using the large black knobs so that there is a firm, even pressure over the mug. Next, set the time and temperature. Feel free to experiment with different values as there is not an exact formula, but for the heat transfer vinyl that is commonly used on the vinyl printer anywhere between 300°F and 325°F for 15 seconds works well. If the graphic begins to peel off when removing the paper then the time should be increased and if the graphic colors change when being applied the temperature should be decreased. Also it is important to use the Teflon sheets found in the t shirt heat press to prevent sticking to the heating element if using the plastic transfer paper. After the time and temperature are set place the mug in the element and clamp down. The timer will beep once the transfer is complete. For complete details see the general procedure.
Demonstration
A mug or glass is required in order to perform a transfer on this machine which makes it difficult to perform simple test or demonstration transfers. Consequently, the demonstration will be pressing a graphic of choice onto a mug or glass.
General Procedure
I
Safety
Insert text
Certification
Note that this quiz includes information from the heat press so make sure to review the heat press wiki before taking it.
Troubleshooting
Maintenance
General maintenance
Insert text
Specific Maintenance Tasks
| Maintenance Procedure | Frequency | Done By |
|---|---|---|
| Sample | Sample | Sample |
The current Ace of the Mug Press is Needed ().
Documentation
The owner's manual contains basic information and tips.