Difference between revisions of "Jewelry Station"
Jump to navigation
Jump to search
| Line 24: | Line 24: | ||
== Training == | == Training == | ||
| + | |||
| + | There are a wide variety of videos on ring making. The basic process is composed of 3 steps. | ||
| + | |||
| + | 1. Punching a hole in your coin. | ||
| + | 2. Fold the coin. | ||
| + | 3. Sizing the ring. | ||
| + | |||
| + | At various points in the process the metal should be annealed to prevent the metal from becoming too brittle due to cold working. When the coin should be annealed is somewhat subject and no exact rule exists. The hardness of the coin will depend on the type and the year it was minted. For example, silver half dollars minted up to 1964 are made with more silver and less copper than silver half dollars minted afterwards. | ||
Revision as of 18:10, 21 March 2019
The current Ace of the Jewelry Station is Aiden Teague (ateague23@georgefox.edu).
Documentation
Training
There are a wide variety of videos on ring making. The basic process is composed of 3 steps.
1. Punching a hole in your coin. 2. Fold the coin. 3. Sizing the ring.
At various points in the process the metal should be annealed to prevent the metal from becoming too brittle due to cold working. When the coin should be annealed is somewhat subject and no exact rule exists. The hardness of the coin will depend on the type and the year it was minted. For example, silver half dollars minted up to 1964 are made with more silver and less copper than silver half dollars minted afterwards.