Horizontal Bandsaw
A horizontal band saw is a type of band saw where the piece stays stationary and the cutting head is a band saw arranged horizontally that cuts into the part by gravity assist.
Our horizontal bandsaw in the shop is the Ellis Model 1600. It can be used to rough cut metal or plastic (NO WOOD) stock to length. It has a cutting capacity of 10" Round and 10" by 8" rectangle at 90 degrees or 6-7/8" round and 8" by 6" rectangle when rotated to 45 degrees.
3 commandments
Stuff about the 3 commandments.
Accessories
Are there any? I suppose we should document the roller stand as part of this.
Documentation
- <figure-inline class="mw-default-size"><figure-inline class="mw-default-size"><figure-inline class="mw-default-size"><figure-inline class="mw-default-size">File:Ellis 1600 Safety.pdf</figure-inline></figure-inline></figure-inline></figure-inline>
- File:Ellis 1600 Safety.pdf
- <figure-inline><figure-inline><figure-inline><figure-inline>File:Ellis 1600 Safety.pdf</figure-inline></figure-inline></figure-inline></figure-inline>
- <figure-inline class="mw-default-size"><figure-inline class="mw-default-size"><figure-inline class="mw-default-size"><figure-inline class="mw-default-size">File:Ellis 1600 Safety.pdf</figure-inline></figure-inline></figure-inline></figure-inline>
- Installation and Operating Manual
- <figure-inline><figure-inline>600x600px</figure-inline></figure-inline>
Training
Something in here about the FoxTale course that doesn't exist yet. This video contains specific information for using the Horizontal Bandsaw in the Maker Hub as well as a basic overview of what will be expected in your live demonstration.