https://maker-hub.georgefox.edu/w/index.php?title=Heat_Press&feed=atom&action=historyHeat Press - Revision history2024-03-28T08:13:08ZRevision history for this page on the wikiMediaWiki 1.35.7https://maker-hub.georgefox.edu/w/index.php?title=Heat_Press&diff=10854&oldid=prevNsullivan: /* Certification */2023-08-26T06:41:25Z<p><span dir="auto"><span class="autocomment">Certification</span></span></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 06:41, 26 August 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l97" >Line 97:</td>
<td colspan="2" class="diff-lineno">Line 97:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Certification ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Certification ==</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[https://georgefox.instructure.com/<del class="diffchange diffchange-inline">courses</del>/<del class="diffchange diffchange-inline">1327 </del>Canvas <del class="diffchange diffchange-inline">Quiz</del>]<del class="diffchange diffchange-inline">.</del></div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">Complete <strong>The Hub - {{PAGENAME}} Module</strong> at the link below to gain access to the {{PAGENAME}}. The Maker Hub Canvas course pertains to all facilities and equipment contained in the Maker Hub; simply complete the quizzes for the facilities/equipment you wish to use in the Maker Hub. Please email <span style="color:blue">makerhub@georgefox.edu</span> if you have any questions.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[https://georgefox.instructure.com/<ins class="diffchange diffchange-inline">enroll</ins>/<ins class="diffchange diffchange-inline">G7CTPX Maker Hub </ins>Canvas <ins class="diffchange diffchange-inline">Course</ins>]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Troubleshooting ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Troubleshooting ==</div></td></tr>
<!-- diff cache key wiki_thehub:diff::1.12:old-10790:rev-10854 -->
</table>Nsullivanhttps://maker-hub.georgefox.edu/w/index.php?title=Heat_Press&diff=10790&oldid=prevNsullivan: /* Documentation */2023-05-30T17:33:30Z<p><span dir="auto"><span class="autocomment">Documentation</span></span></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:33, 30 May 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l40" >Line 40:</td>
<td colspan="2" class="diff-lineno">Line 40:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{{#evu:https://www.youtube.com/watch?v=9I1DpWAQKuA}}</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>{{#evu:https://www.youtube.com/watch?v=9I1DpWAQKuA}}</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>== Documentation ==</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>==Documentation==</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>==== Terminology ====</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>====Terminology====</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">[[File:Heat Press Terminology .jpg|right|thumb|500x500px| '''Figure 1.''' Heat press and its terminology]]</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Platen - The flat plates on the top and bottom of the machine which apply pressure to the material along with heat. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Platen - The flat plates on the top and bottom of the machine which apply pressure to the material along with heat. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Pressure Adjustment Knob - The knob located over the center of the upper platen which is used to adjust the pressure applied to the material.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Pressure Adjustment Knob - The knob located over the center of the upper platen which is used to adjust the pressure applied to the material.</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l49" >Line 49:</td>
<td colspan="2" class="diff-lineno">Line 50:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Material - The item onto which the graphic is transferred. In many cases this is a t-shirt. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Material - The item onto which the graphic is transferred. In many cases this is a t-shirt. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Transfer Paper - The clear material on top of the graphic. This should be left on until after the transfer has occurred.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Transfer Paper - The clear material on top of the graphic. This should be left on until after the transfer has occurred.</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* Protective Sheets - The heat resistant sheets in the press that prevent graphics from sticking to the platen. These are not attached to the platens. <del class="diffchange diffchange-inline">[[File:Heat Press Terminology .jpg|none|thumb|500x500px| '''Figure 1.''' Heat press and its terminology ]]</del></div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* Protective Sheets - The heat resistant sheets in the press that prevent graphics from sticking to the platen. These are not attached to the platens. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>==== <del class="diffchange diffchange-inline">Manuals </del>====</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>====<ins class="diffchange diffchange-inline">User Manual</ins>====</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Media:Hotronix-MAXX-Digital-Clam-Press-Operators-Manual.pdf|Heat Press User Manual]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Media:Hotronix-MAXX-Digital-Clam-Press-Operators-Manual.pdf|Heat Press User Manual]]</div></td></tr>
</table>Nsullivanhttps://maker-hub.georgefox.edu/w/index.php?title=Heat_Press&diff=10789&oldid=prevNsullivan: /* Demonstration */2023-05-30T17:29:19Z<p><span dir="auto"><span class="autocomment">Demonstration</span></span></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:29, 30 May 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l65" >Line 65:</td>
<td colspan="2" class="diff-lineno">Line 65:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>When completing the heat press demonstration, it is helpful to first complete the [[Vinyl Printer+Cutter]] or [[Sublimation Printer]] training. Training for the vinyl printer/cutter or sublimation printer may be accomplished concurrently with the heat press if coordinated beforehand. It is also helpful to bring a prepared graphic to the training; otherwise, a George Fox logo can be used.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>When completing the heat press demonstration, it is helpful to first complete the [[Vinyl Printer+Cutter]] or [[Sublimation Printer]] training. Training for the vinyl printer/cutter or sublimation printer may be accomplished concurrently with the heat press if coordinated beforehand. It is also helpful to bring a prepared graphic to the training; otherwise, a George Fox logo can be used.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The standard heat press demonstration is to make a custom t-shirt. There are two options available for putting a graphic/text on a t-shirt: sublimation printing and vinyl transfer. </div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The standard heat press demonstration is to make a custom t-shirt. There are two options available for putting a graphic/text on a t-shirt: sublimation printing and <ins class="diffchange diffchange-inline">vinyl transfer. The Maker Hub has some t-shirts available for heat press demonstrations. If you decide to bring your own t-shirt, make sure you have researched the correct materials and colors that will produce a successful sublimation print or </ins>vinyl transfer.</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del class="diffchange diffchange-inline">When </del>the <del class="diffchange diffchange-inline">student has set </del>up the <del class="diffchange diffchange-inline">machine </del>and <del class="diffchange diffchange-inline">applied </del>a graphic of <del class="diffchange diffchange-inline">their choice onto a material of their choice </del>the <del class="diffchange diffchange-inline">demonstration will </del>be <del class="diffchange diffchange-inline">complete</del>.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">#Set </ins>the <ins class="diffchange diffchange-inline">heat press to the appropriate temperature and time for your sublimation print or vinyl transfer. The heat press can take </ins>up <ins class="diffchange diffchange-inline">to 30 minutes to reach temperature, so turn on the heat press at the beginning of </ins>the <ins class="diffchange diffchange-inline">training.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">#Print or cut the graphic on your preferred medium.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">#Place a Teflon sheet on the lower platen of the heat press.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">#Place the t-shirt on (or around/enveloping) the lower platen.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">#Position the graphic on the t-shirt </ins>and <ins class="diffchange diffchange-inline">fix it in place with the green heat tape if needed.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">#Place </ins>a <ins class="diffchange diffchange-inline">fresh piece of Kraft paper from the Low Fidelity Prototyping Station on top of your </ins>graphic<ins class="diffchange diffchange-inline">.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">#Place another Teflon sheet on top </ins>of <ins class="diffchange diffchange-inline">everything. This should complete the "sandwich." In most cases, </ins>the <ins class="diffchange diffchange-inline">order from bottom to top should </ins>be <ins class="diffchange diffchange-inline">lower platen, Teflon sheet, t-shirt, graphic, Kraft paper, Teflon sheet, upper platen.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">#Apply the graphic by closing the heat press and wait for the timer to count down.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">#Behold your new custom t-shirt, wear it with pride, and tell all your friends how cool the Maker Hub is</ins>.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== General Procedure ====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== General Procedure ====</div></td></tr>
</table>Nsullivanhttps://maker-hub.georgefox.edu/w/index.php?title=Heat_Press&diff=10788&oldid=prevNsullivan: /* Demonstration */2023-05-30T17:01:49Z<p><span dir="auto"><span class="autocomment">Demonstration</span></span></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:01, 30 May 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l63" >Line 63:</td>
<td colspan="2" class="diff-lineno">Line 63:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Demonstration ====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Demonstration ====</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del class="diffchange diffchange-inline">In order to complete this </del>demonstration, it is <del class="diffchange diffchange-inline">necessary to have a graphic prepared. It would be </del>helpful to first complete the <del class="diffchange diffchange-inline">vinyl printer </del>or <del class="diffchange diffchange-inline">the </del>[[Sublimation Printer]] training. When the student has set up the machine and applied a graphic of their choice onto a material of their choice the demonstration will be complete<del class="diffchange diffchange-inline">. If the student does not want to choose a graphic or material, a George Fox logo can be downloaded from the George Fox website, printed on a 2" x 2" square, and then be applied to a piece of scrap from the sewing area</del>.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">When completing the heat press </ins>demonstration, it is helpful to first complete the <ins class="diffchange diffchange-inline">[[Vinyl Printer+Cutter]] </ins>or [[Sublimation Printer]] training. <ins class="diffchange diffchange-inline">Training for the vinyl printer/cutter or sublimation printer may be accomplished concurrently with the heat press if coordinated beforehand. It is also helpful to bring a prepared graphic to the training; otherwise, a George Fox logo can be used.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">The standard heat press demonstration is to make a custom t-shirt. There are two options available for putting a graphic/text on a t-shirt: sublimation printing and vinyl transfer. </ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>When the student has set up the machine and applied a graphic of their choice onto a material of their choice the demonstration will be complete.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== General Procedure ====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== General Procedure ====</div></td></tr>
</table>Nsullivanhttps://maker-hub.georgefox.edu/w/index.php?title=Heat_Press&diff=10713&oldid=prevGdowler: /* Troubleshooting */2023-04-04T00:50:21Z<p><span dir="auto"><span class="autocomment">Troubleshooting</span></span></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 00:50, 4 April 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l87" >Line 87:</td>
<td colspan="2" class="diff-lineno">Line 87:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Troubleshooting ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Troubleshooting ==</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>One issue that can occur is that the graphic can begin to peel off of the material as the transfer paper is removed. If this happens <del class="diffchange diffchange-inline">place </del>the transfer paper <del class="diffchange diffchange-inline">back down</del>, run through the pressing process again, and then pull <del class="diffchange diffchange-inline">of </del>the transfer paper while following the steps laid out in the procedure.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>One issue that can occur is that the graphic can begin to peel off of the material as the transfer paper is removed. If this happens <ins class="diffchange diffchange-inline">replace </ins>the transfer paper, run through the pressing process again, and then pull <ins class="diffchange diffchange-inline">off </ins>the transfer paper while following the steps laid out in the procedure.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>When <del class="diffchange diffchange-inline">transfering </del>sublimation ink, it is recommended to <del class="diffchange diffchange-inline">lift </del>the heat press <del class="diffchange diffchange-inline">slowly </del>once the set time expires to <del class="diffchange diffchange-inline">avoid letting </del>the air that <del class="diffchange diffchange-inline">rushes in upon opening the heat press </del>move the paper around. <del class="diffchange diffchange-inline">With </del>the paper still <del class="diffchange diffchange-inline">being </del>hot, it <del class="diffchange diffchange-inline">will </del>continue to transfer small amounts of ink even though most <del class="diffchange diffchange-inline">of the ink will have </del>already <del class="diffchange diffchange-inline">transferred when the time expires</del>. If the paper moves, you can get a faint double-image or ghosting effect on your t-shirt <del class="diffchange diffchange-inline">which is often undesirable</del>.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>When <ins class="diffchange diffchange-inline">transferring </ins>sublimation ink, it is recommended to <ins class="diffchange diffchange-inline">slowly raise </ins>the heat press once the set time expires <ins class="diffchange diffchange-inline">in order </ins>to <ins class="diffchange diffchange-inline">prevent </ins>the <ins class="diffchange diffchange-inline">rush of </ins>air that <ins class="diffchange diffchange-inline">may </ins>move the paper around. <ins class="diffchange diffchange-inline">Since </ins>the paper <ins class="diffchange diffchange-inline">will </ins>still <ins class="diffchange diffchange-inline">be </ins>hot, it <ins class="diffchange diffchange-inline">can </ins>continue to transfer small amounts of ink even though most <ins class="diffchange diffchange-inline">has been transferred </ins>already. If the paper moves <ins class="diffchange diffchange-inline">as the press is opened</ins>, you can get a faint double-image or ghosting effect on your t-shirt.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== General Maintenance ====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== General Maintenance ====</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Due to its simplicity and limited number of moving parts this machine requires a minimal amount of maintenance. The <del class="diffchange diffchange-inline">little </del>maintenance required consists of wiping down the machine as needed use to ensure there is no dust or vinyl transferring left on the machine. To do this, grab a paper towel from either the prototype lab or the sink next to the tool room and wipe over the machine. Pay special attention to the upper platen as it is the surface that transfers heat to the vinyl<del class="diffchange diffchange-inline">. For more information on when this should be done and who should do it see the table below</del>. </div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Due to its simplicity and limited number of moving parts this machine requires a minimal amount of maintenance. The maintenance required consists of wiping down the machine as needed <ins class="diffchange diffchange-inline">after each </ins>use to ensure there is no dust or vinyl transferring left on the machine. To do this, grab a paper towel from either the prototype lab or the sink next to the tool room and wipe over the machine. Pay special attention to the upper platen as it is the surface that transfers heat to the vinyl.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Specific Maintenance Tasks ====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Specific Maintenance Tasks ====</div></td></tr>
</table>Gdowlerhttps://maker-hub.georgefox.edu/w/index.php?title=Heat_Press&diff=10712&oldid=prevGdowler: /* General Procedure */2023-04-04T00:18:17Z<p><span dir="auto"><span class="autocomment">General Procedure</span></span></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 00:18, 4 April 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l68" >Line 68:</td>
<td colspan="2" class="diff-lineno">Line 68:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Adjusting the Temperature and Time:</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Adjusting the Temperature and Time:</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Press the (Mode) select button in the center of the Control Panel so that the (SET) and (TEMP) lights located next to the display will illuminate. This process can be seen in Figure 2.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Press the (Mode) select button in the center of the Control Panel so that the (SET) and (TEMP) lights located next to the display will illuminate. This process can be seen in Figure 2.</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># Press the (+) or (-) button to raise or lower the temperature setting.The LED Display will show changes as you make them.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Press the (+) or (-) button to raise or lower the temperature setting. The LED Display will show changes as you make them.</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># Once you have adjusted the temperature, press the (Mode) Select button again to advance to Time Mode. The (SET) and (TIME) lights will illuminate. If you do not want to adjust the temperature first you will need to press (Mode</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Once you have adjusted the temperature, press the (Mode) Select button again to advance to Time Mode. The (SET) and (TIME) lights will illuminate. If you do not want to adjust the temperature first you will need to press (Mode<ins class="diffchange diffchange-inline">).</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Adjust the time in the same manner you adjusted the temperature.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Adjust the time in the same manner you adjusted the temperature.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Select the desired time and push the Mode Select button again to exit. All lights will be off and the press will return to PRINT mode.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Select the desired time and push the Mode Select button again to exit. All lights will be off and the press will return to PRINT mode.</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l81" >Line 81:</td>
<td colspan="2" class="diff-lineno">Line 81:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Remove the material from the heat press.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Remove the material from the heat press.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Carefully pull off the heat transfer paper, making sure to keep a steep angle so that the graphic does not peel off. This can be done while the material is hot or cold. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div># Carefully pull off the heat transfer paper, making sure to keep a steep angle so that the graphic does not peel off. This can be done while the material is hot or cold. </div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div># Reset the space by turning off the heat press, leaving it open, and wiping off any dust or other debris as needed. </div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div># Reset the space by turning off the heat press, leaving it open, and wiping off any dust or other debris as needed.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Certification ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Certification ==</div></td></tr>
</table>Gdowlerhttps://maker-hub.georgefox.edu/w/index.php?title=Heat_Press&diff=10711&oldid=prevGdowler: /* Demonstration */2023-04-04T00:13:17Z<p><span dir="auto"><span class="autocomment">Demonstration</span></span></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 00:13, 4 April 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l63" >Line 63:</td>
<td colspan="2" class="diff-lineno">Line 63:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Demonstration ====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Demonstration ====</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>In order to complete this demonstration, it is necessary to have a graphic prepared <del class="diffchange diffchange-inline">and as a result will </del>be helpful to first <del class="diffchange diffchange-inline">go through </del>the vinyl printer <del class="diffchange diffchange-inline">training first </del>or the [[Sublimation Printer]]. <del class="diffchange diffchange-inline">To complete the demonstration, </del>the student <del class="diffchange diffchange-inline">will </del>set up the machine and <del class="diffchange diffchange-inline">apply </del>a graphic of their choice onto a material of their choice. If the student does not want to choose a graphic or material, a George Fox logo can be downloaded from the George Fox website, printed on a 2" x 2" square, and then be applied to a piece of scrap from the sewing <del class="diffchange diffchange-inline">machine</del>.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>In order to complete this demonstration, it is necessary to have a graphic prepared<ins class="diffchange diffchange-inline">. It would </ins>be helpful to first <ins class="diffchange diffchange-inline">complete </ins>the vinyl printer or the [[Sublimation Printer]] <ins class="diffchange diffchange-inline">training</ins>. <ins class="diffchange diffchange-inline">When </ins>the student <ins class="diffchange diffchange-inline">has </ins>set up the machine and <ins class="diffchange diffchange-inline">applied </ins>a graphic of their choice onto a material of their choice <ins class="diffchange diffchange-inline">the demonstration will be complete</ins>. If the student does not want to choose a graphic or material, a George Fox logo can be downloaded from the George Fox website, printed on a 2" x 2" square, and then be applied to a piece of scrap from the sewing <ins class="diffchange diffchange-inline">area</ins>.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== General Procedure ====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== General Procedure ====</div></td></tr>
</table>Gdowlerhttps://maker-hub.georgefox.edu/w/index.php?title=Heat_Press&diff=10710&oldid=prevGdowler: /* Operation */2023-04-04T00:06:50Z<p><span dir="auto"><span class="autocomment">Operation</span></span></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 00:06, 4 April 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l58" >Line 58:</td>
<td colspan="2" class="diff-lineno">Line 58:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Operation ====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Operation ====</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Overall, the operation of the heat press is very simple with most of the work occurring when setting the temperature and press time. The temperature of the heat press can be precisely set anywhere between 200°F and 430°F while being regulated within one degree of the set temperature. When applying graphics created by the vinyl printer, it is recommended that temperature be set between 300°F and 325°F (305°F works well) but other temperatures can be experimented with if the graphics are not transferring as desired. The time should be set 15 seconds as this will ensure a proper transfer without overheating the vinyl or the material it is being applied <del class="diffchange diffchange-inline">to</del>. If the vinyl begins to peel off when removing the transfer paper then the time can be lengthened <del class="diffchange diffchange-inline">past </del>15 seconds, and inversely the time can be decreased if there is concern about melting the material. After the time at temperature has been set, the material should be placed between the platens and pressed for 2-3 seconds to remove any wrinkles. <del class="diffchange diffchange-inline">At this point </del>the graphic can be placed at the desired location on the material and pressed until the timer expires.The final step in the process is to remove the material from the press and carefully pull <del class="diffchange diffchange-inline">of </del>the transfer paper to reveal the completed transfer. Make sure to reset the space by leaving the platens open and wiping down the machine as needed.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Overall, the operation of the heat press is very simple with most of the work occurring when setting the temperature and press time. The temperature of the heat press can be precisely set anywhere between 200°F and 430°F while being regulated within one degree of the set temperature. When applying graphics created by the vinyl printer, it is recommended that temperature be set between 300°F and 325°F (305°F works well)<ins class="diffchange diffchange-inline">, </ins>but other temperatures can be experimented with if the graphics are not transferring as desired. The time should be set <ins class="diffchange diffchange-inline">to </ins>15 seconds as this will ensure a proper transfer without overheating the vinyl or the material <ins class="diffchange diffchange-inline">to which </ins>it is being applied. If the vinyl begins to peel off when removing the transfer paper then the time can be lengthened <ins class="diffchange diffchange-inline">beyond </ins>15 seconds, and inversely the time can be decreased if there is concern about melting the material. After the time at temperature has been set, the material should be placed between the platens and pressed for 2-3 seconds to remove any wrinkles. <ins class="diffchange diffchange-inline">Now </ins>the graphic can be placed at the desired location on the material and pressed until the timer expires. The final step in the process is to remove the material from the press and carefully pull <ins class="diffchange diffchange-inline">off </ins>the transfer paper to reveal the completed transfer. Make sure to reset the space by leaving the platens open and wiping down the machine as needed.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>If you are using a transfer from the dye sublimation printer you will need to set the temperature of the heat press to 400°F and set the timer to approximately 40 seconds. You will want to use two pieces of butcher paper to prevent the ink from bleeding through the shirt or fabric. One piece of paper should be placed under the top layer of material that is receiving the transfer and the other piece will be placed between the heating element and the transfer paper.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>If you are using a transfer from the dye sublimation printer you will need to set the temperature of the heat press to 400°F and set the timer to approximately 40 seconds. You will want to use two pieces of butcher paper to prevent the ink from bleeding through the shirt or fabric. One piece of paper should be placed under the top layer of material that is receiving the transfer and the other piece will be placed between the heating element and the transfer paper.</div></td></tr>
</table>Gdowlerhttps://maker-hub.georgefox.edu/w/index.php?title=Heat_Press&diff=10709&oldid=prevGdowler: /* Terminology */2023-04-04T00:01:25Z<p><span dir="auto"><span class="autocomment">Terminology</span></span></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 00:01, 4 April 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l47" >Line 47:</td>
<td colspan="2" class="diff-lineno">Line 47:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Lift Handle - The large handle used to raise or lower the upper platen</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Lift Handle - The large handle used to raise or lower the upper platen</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Graphic - The design that is being transferred such as a logo printed on heat transfer vinyl.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Graphic - The design that is being transferred such as a logo printed on heat transfer vinyl.</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* Material - The item <del class="diffchange diffchange-inline">on </del>which the graphic is transferred. In many cases this is a t-shirt. </div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* Material - The item <ins class="diffchange diffchange-inline">onto </ins>which the graphic is transferred. In many cases this is a t-shirt. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Transfer Paper - The clear material on top of the graphic. This should be left on until after the transfer has occurred.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Transfer Paper - The clear material on top of the graphic. This should be left on until after the transfer has occurred.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Protective Sheets - The heat resistant sheets in the press that prevent graphics from sticking to the platen. These are not attached to the platens. [[File:Heat Press Terminology .jpg|none|thumb|500x500px| '''Figure 1.''' Heat press and its terminology ]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Protective Sheets - The heat resistant sheets in the press that prevent graphics from sticking to the platen. These are not attached to the platens. [[File:Heat Press Terminology .jpg|none|thumb|500x500px| '''Figure 1.''' Heat press and its terminology ]]</div></td></tr>
</table>Gdowlerhttps://maker-hub.georgefox.edu/w/index.php?title=Heat_Press&diff=10547&oldid=prevNsullivan at 19:25, 23 January 20232023-01-23T19:25:54Z<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 19:25, 23 January 2023</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l4" >Line 4:</td>
<td colspan="2" class="diff-lineno">Line 4:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div> |Is used in domain=Vinyl</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div> |Is used in domain=Vinyl</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div> |Has name={{PAGENAME}}</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div> |Has name={{PAGENAME}}</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> |Has make=Stahls' Hotronix</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> |Has model=Maxx20</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> |Has serial number=201810973</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> |Has life expectancy=</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> |Has year of manufacture or purchase=</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> |Has replacement cost=</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div> |Has icon=File: Heat_pressIcon.png</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div> |Has icon=File: Heat_pressIcon.png</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div> |Has icondesc=</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div> |Has icondesc=</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l11" >Line 11:</td>
<td colspan="2" class="diff-lineno">Line 17:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div> |Has description=</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div> |Has description=</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div> |Has certification=https://georgefox.instructure.com/courses/1327</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div> |Has certification=https://georgefox.instructure.com/courses/1327</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"> |Has make=Stahls' Hotronix</del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"> |Has model=Maxx20</del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"> |Has serial number=201810973</del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div> |Has ace=Needed;Makerhub@georgefox.edu</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div> |Has ace=Needed;Makerhub@georgefox.edu</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>}}</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>}}</div></td></tr>
</table>Nsullivan