Heat Press

The Stahls Maxx Clam Heat Press

Model: Stahls MAXX Clam Heat Press

Serial Number:

Ace: Needed (Makerhub@georgefox.edu).

Description

The heat press is a machine used to transfer graphics onto items like T-shirts, bags, jerseys and more. Materials that can be transferred include heat transfer vinyl (HTV), screen printed transfers, rhinestones, and more. Within the Hub, the heat press works in conjunction with the vinyl printer and cutter to adhere vinyl to cloth and is commonly used to make custom t-shirts or to add logos to clothing.

Documentation

This manual covers the use, calibration, and safety of the heat press.

Operator's Manual

Training

The heat press can press heat transfer applications into many materials. Be sure to check the instructions for your type of heat transfer material before pressing.

Maintenance

Due to its simplicity and limited number of moving parts this machine requires a minimal amount of maintenance. The little maintenance required consists of wiping down the machine after each use to ensure there is no dust or vinyl transferring left on the machine. To do this, grab a paper towel from either the prototype lab or the sink next to the tool room and wipe over the machine. Pay special attention to the upper platen as it is the surface that transfers heat to the vinyl. For more information on when this should be done and who should do it see the table below.

Maintenance Procedure	Frequency	Done By
Machine wipe down	After each use	The student