124
edits
Changes
Jump to navigation
Jump to search
Line 30:
Line 30: + + + + + + + + + Line 87:
Line 96: − − ==Safety== − * Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury or damage the machine. − * Always use the dust collection system to keep the dust levels in the wood shop from reaching a dangerous level. − * Always hold onto the router while it is cutting. It is a CNC but it is not fastened to anything and could tip over if the bit catches on the material. − * Cut at an appropriate feed rate. If Origin’s correction range is unable to keep up with your feed rate, move Origin slower, reduce the depth of cut, change your router bit, and/or adjust the spindle speed. − * Adhere work piece elements that may come loose during cutting. When cutting items out of work piece materials, use double sided tape or alternative methods to hold elements down to your workbench and/or spoil board. This will prevent items from coming loose when cutting is complete.
no edit summary
__TOC__
__TOC__
==Safety First==
[[File:Safety First HD2.png|left|150px]]
* Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury or damage the machine.
* Always use the dust collection system to keep the dust levels in the wood shop from reaching a dangerous level.
* Always hold onto the router while it is cutting. It is a CNC but it is not fastened to anything and could tip over if the bit catches on the material.
* Cut at an appropriate feed rate. If Origin’s correction range is unable to keep up with your feed rate, move Origin slower, reduce the depth of cut, change your router bit, and/or adjust the spindle speed.
* Adhere work piece elements that may come loose during cutting. When cutting items out of work piece materials, use double sided tape or alternative methods to hold elements down to your workbench and/or spoil board. This will prevent items from coming loose when cutting is complete.
==Description==
==Description==
# Hit the green button on the handle or press start on the screen to perform the cut.
# Hit the green button on the handle or press start on the screen to perform the cut.
# Reset the space when finished by vacuuming any dust, returning the router to its box, and putting away any scrap material.
# Reset the space when finished by vacuuming any dust, returning the router to its box, and putting away any scrap material.
==Certification==
==Certification==