53
edits
Changes
Jump to navigation
Jump to search
Line 60:
Line 60: − +
no edit summary
====Overview====
====Overview====
The basic workflow for using the F370 will be as follows: Preparing the Printer, Preparing Your File for Print, Printing Your Part, Soaking Your Part. First, you prepare the printer so that it is physically ready to print any design you give it. Second, you prepare the part on the software used by the F370. This generates a file to that tells the machine how to produce your part. Third, the machine prints your part. Fourth, you soak the part in the bath so that it dissolves all the support material. Then you have a finished part! Each section below will have specific information relevant to each step. You are encouraged to speak with a lab volunteer for advice and guidance for any step of the process.
The basic workflow for using the F370 will be as follows: Preparing the Printer, Preparing Your File for Print, Printing Your Part, Soaking Your Part. First, you prepare the printer so that it is physically ready to print any design you give it. Second, you prepare the part on the software used by the F370. This generates a file to that tells the machine how to produce your part. Third, the machine prints your part. Fourth, you soak the part in the bath so that it dissolves all the support material. Then you have a finished part! Each section below will have specific information relevant to each step. You are encouraged to speak with a lab volunteer for advice and guidance for any step of the process.
====Demonstration====
====Demonstration====