2,292
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + − + + + + + + + + + − + Line 123:
Line 131: − + Line 167:
Line 175: + + + Line 182:
Line 193: + + +
no edit summary
[[File:Egg 36.jpg|300px|thumb|right|Finished 3D Printed Egg Shaker]]
[[File:Egg 36.jpg|300px|thumb|right|Finished 3D Printed Egg Shaker]]
In this [[TV]], we will take you through the steps of designing an egg shaker in [[Solidworks|SolidWorks]] and then 3D printing it using the [[Prusa 3D Printer]].
In this [[TV]], we will take you through the steps of designing an egg shaker in [[Solidworks|SolidWorks]], preparing the print in [[PrusaSlicer]], and then 3D printing it using the [[Prusa 3D Printer]].
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
_TOC_
=Procedure=
=Procedure=
==SolidWorks==
===SolidWorks===
<strong>Step 1:</strong> Open SolidWorks 2020, and select a new part. Don't forget to save your file frequently as you go. In the bottom-right corner of your Solidworks window, change the units to MMGS (millimeter, gram, second).
<strong>Step 1:</strong> Open SolidWorks 2020, and select a new part. Don't forget to save your file frequently as you go. In the bottom-right corner of your Solidworks window, change the units to MMGS (millimeter, gram, second).
<br>
<br>
==PrusaSlicer==
===PrusaSlicer===
<strong>Step 23:</strong> In the Prototype Lab, open your .stl file in [[PrusaSlicer]]. You should look for the following icon.
<strong>Step 23:</strong> In the Prototype Lab, open your .stl file in [[PrusaSlicer]]. You should look for the following icon.
<br>
<br>
<br>
<br>
===Printing===
<strong>Step 31:</strong> If everything looks good, click Export G-code in the bottom right corner and save the G-code on an SD card. You are now ready to take the SD card to one of the Prusa 3D printers and begin your print (make sure the MK3/MK3S on the printer matches what you selected in PrusaSlicer). Log your print and use the dry erase markers to record your contact info and print duration. Clean the build plate with a few drops of alcohol before you start your print.
<strong>Step 31:</strong> If everything looks good, click Export G-code in the bottom right corner and save the G-code on an SD card. You are now ready to take the SD card to one of the Prusa 3D printers and begin your print (make sure the MK3/MK3S on the printer matches what you selected in PrusaSlicer). Log your print and use the dry erase markers to record your contact info and print duration. Clean the build plate with a few drops of alcohol before you start your print.
<br>
<br>
<br>
<br>
===Finishing===
<strong>Step 34:</strong> Once the print finishes, remove the entire build plate from the printer (it is magnetically held in place). Gently flex the build plate in various directions to loosen the print. Use your hands to pull the print and support structure off. Only use the scraper as a last resort for removing the print. Scrapers damage the build plate and shorten their lifespan. Reset the space for the next person who will use the printer after you.
<strong>Step 34:</strong> Once the print finishes, remove the entire build plate from the printer (it is magnetically held in place). Gently flex the build plate in various directions to loosen the print. Use your hands to pull the print and support structure off. Only use the scraper as a last resort for removing the print. Scrapers damage the build plate and shorten their lifespan. Reset the space for the next person who will use the printer after you.