124
edits
Changes
Jump to navigation
Jump to search
Line 36:
Line 36: − + − * This includes material that could be made loose during the cutting process. Use tabs to secure such material.
→Safety First
* The tooling is very sharp and spins at over 18,000 RPM. Keep your body parts away from the cutter and spindle. You need fingers for the ring you will get by spring.
* The tooling is very sharp and spins at over 18,000 RPM. Keep your body parts away from the cutter and spindle. You need fingers for the ring you will get by spring.
* Stay behind the yellow/black safety line when operating the router. The router is very large and will not stop if you get in its way.
* Stay behind the yellow/black safety line when operating the router. The router is very large and will not stop if you get in its way.
* Materials need to be securely fastened to the table by vacuum or mechanical means.
* Materials need to be securely fastened to the table by vacuum or mechanical means. This includes material that could be made loose during the cutting process. Use tabs to secure such material.
* Never attempt to cut a hole the same diameter as the cuter with a down cut force cutter. This will compress the chips and can create a fire due to the air draw of the vacuum table.
* Never attempt to cut a hole the same diameter as the cuter with a down cut force cutter. This will compress the chips and can create a fire due to the air draw of the vacuum table.
* Always wear ear protection when operating the CNC router.
* Always wear ear protection when operating the CNC router.