Changes

===Demonstration===

===Demonstration===

Demonstrate you can safely setup the hand router/tooling.  You will need to chamfer or round over an edge of material.  Remember to always unplug the router when changing tools or making adjustments to prevent an accidental turn on situation. The direction of travel is also important when making cuts to prevent tearing out corners and edges. Use router bits with bearings to help guide the cutter. Never attempt to free hand a cut without a guide for the router to follow as this can lead to the router running away out of control.

Demonstrate you can safely setup the table router with a roundover bit.  Remember to always unplug the router when changing tools or making adjustments to prevent an accidental turn-on situation. Perform a roundover cut on a piece of scrap wood.

===General Procedure===

===General Procedure===