With these STL's, follow the directions for whichever 3D printer you will use for these parts.
With these STL's, follow the directions for whichever 3D printer you will use for these parts.
+
+
== Attach the magnets ==
+
+
Each slice (including the base), will have 8 magnets attached to it (4 on top, 4 on bottom). These magnets are 1/4" diameter x 1/8" deep. Each slice will therefore need a hole drilled 1/8" deep in the center of each corner. The acrylic slices have marks already. It is important that the wood holes line up exactly.