Changes

Demonstrate you can setup the press and safety install a pin with a press fit into an aluminum block.  You will also press the pin out after insertion.  The pin has an outer diameter of .375" and the block has 4 holes that have been reamed to .374" The dowel pin, plate, guide, and extraction tool will be provided.  Remember the guide will help keep the pin straight during installation. The extraction tool has a pin with a smaller diameter that will assist in pressing out the dowel pin. You will also need an extra person to help adjust the table height.

Demonstrate you can setup the press and safety install a pin with a press fit into an aluminum block.  You will also press the pin out after insertion.  The pin has an outer diameter of .375" and the block has 4 holes that have been reamed to .374" The dowel pin, plate, guide, and extraction tool will be provided.  Remember the guide will help keep the pin straight during installation. The extraction tool has a pin with a smaller diameter that will assist in pressing out the dowel pin. You will also need an extra person to help adjust the table height.

<br>,br

<br><br>

Picture of tooling required:<br><br>

Picture of tooling required:<br><br>