1,956
edits
Changes
Jump to navigation
Jump to search
Line 98:
Line 98: − + − + − + − + − +
→General Procedure
3. If you need to adjust the table frame height remove the table plates and assembly pieces before removing the safety clips from the pins supporting the table. The table plates are heavy so be carefule not to drop them.
3. If you need to adjust the table frame height remove the table plates and assembly pieces before removing the safety clips from the pins supporting the table. The table plates are heavy so be carefule not to drop them.
4. To move the table frame down you will remove the two upper pins and reinstall them in the correct holes below.
4. To move the table frame down you will remove the two upper table support pins and reinstall them in the desired holes below.
5. You will need a second person to help lift the table frame slightly while removing the remaining two pins and slowly lower the table onto the pins below.
5. You will need a second person to help lift the table frame slightly while removing the remaining two table support pins and slowly lower the table onto the pins below.
6. Reinstall the top two pins and safety clips.
6. Reinstall the top two table support pins and safety clips.
7. To move the table frame up you will leave the lower pins installed and remove the two upper pins. The lower pins will help prevent the table from accidentally dropping to the floor while making an adjustment.
7. To move the table frame up you will leave the lower pins installed and remove the two upper pins. The lower pins will help prevent the table from accidentally dropping to the floor while making an adjustment.
8. You will need a second person to help lift the table frame while installing the two removed pins in the 2 lower positions.
8. You will need a second person to help lift the table frame while installing the two removed frame pins in the 2 lower positions.
9. Install the 2 remaining top pins and safety clips.
9. Install the 2 remaining top frame pins and safety clips.
10. Place table support plates and assembly pieces back onto the table.
10. Place table support plates and assembly pieces back onto the table.